Suppr超能文献

逐束、平面调强放疗 QA 通过率不能预测临床相关的患者剂量误差。

Per-beam, planar IMRT QA passing rates do not predict clinically relevant patient dose errors.

机构信息

Canis Lupus LLC and Department of Human Oncology, University of Wisconsin, Merrimac, Wisconsin 53561, USA.

出版信息

Med Phys. 2011 Feb;38(2):1037-44. doi: 10.1118/1.3544657.

Abstract

PURPOSE

The purpose of this work is to determine the statistical correlation between per-beam, planar IMRT QA passing rates and several clinically relevant, anatomy-based dose errors for per-patient IMRT QA. The intent is to assess the predictive power of a common conventional IMRT QA performance metric, the Gamma passing rate per beam.

METHODS

Ninety-six unique data sets were created by inducing four types of dose errors in 24 clinical head and neck IMRT plans, each planned with 6 MV Varian 120-leaf MLC linear accelerators using a commercial treatment planning system and step-and-shoot delivery. The error-free beams/plans were used as "simulated measurements" (for generating the IMRT QA dose planes and the anatomy dose metrics) to compare to the corresponding data calculated by the error-induced plans. The degree of the induced errors was tuned to mimic IMRT QA passing rates that are commonly achieved using conventional methods.

RESULTS

Analysis of clinical metrics (parotid mean doses, spinal cord max and D1cc, CTV D95, and larynx mean) vs. IMRT QA Gamma analysis (3%/3 mm, 2/2, 1/1) showed that in all cases, there were only weak to moderate correlations (range of Pearson's r-values: -0.295 to 0.653). Moreover, the moderate correlations actually had positive Pearson's r-values (i.e., clinically relevant metric differences increased with increasing IMRT QA passing rate), indicating that some of the largest anatomy-based dose differences occurred in the cases of high IMRT QA passing rates, which may be called "false negatives." The results also show numerous instances of false positives or cases where low IMRT QA passing rates do not imply large errors in anatomy dose metrics. In none of the cases was there correlation consistent with high predictive power of planar IMRT passing rates, i.e., in none of the cases did high IMRT QA Gamma passing rates predict low errors in anatomy dose metrics or vice versa.

CONCLUSIONS

There is a lack of correlation between conventional IMRT QA performance metrics (Gamma passing rates) and dose errors in anatomic regions-of-interest. The most common acceptance criteria and published actions levels therefore have insufficient, or at least unproven, predictive power for per-patient IMRT QA.

摘要

目的

本研究旨在确定单次射束平面调强放射治疗(IMRT)质量保证(QA)通过率与基于临床相关解剖剂量误差的统计学相关性,针对的是每位患者的 IMRT QA。其目的是评估常规 IMRT QA 性能指标——伽玛通过率的预测能力。

方法

通过在 24 例临床头颈部调强放射治疗计划中引入 4 种剂量误差,生成了 96 个独特数据集。每个计划均使用瓦里安 120 叶片 ML C 直线加速器和商业治疗计划系统进行 6MV 调强放射治疗,采用步进式传输。无误差束/计划被用作“模拟测量”(用于生成 IMRT QA 剂量平面和解剖剂量指标),并与误差诱导计划计算的相应数据进行比较。诱导误差的程度被调整为模拟常规方法通常达到的 IMRT QA 通过率。

结果

对临床指标(腮腺平均剂量、脊髓最大剂量和 D1cc、CTV D95 和喉平均剂量)与 IMRT QA 伽玛分析(3%/3mm、2/2、1/1)的分析表明,在所有情况下,只有弱到中度相关性(皮尔逊 r 值范围:-0.295 至 0.653)。此外,中度相关性实际上具有正的皮尔逊 r 值(即,临床相关的指标差异随着 IMRT QA 通过率的增加而增加),表明在 IMRT QA 通过率较高的情况下,一些最大的解剖剂量差异发生,这可能被称为“假阴性”。结果还显示了许多假阳性的例子,或者低 IMRT QA 通过率并不意味着解剖剂量指标有较大误差的情况。在没有一个案例中,平面 IMRT 通过率具有高预测能力的相关性,即高 IMRT QA 伽玛通过率并不一定能预测解剖剂量指标的低误差,反之亦然。

结论

在感兴趣的解剖区域中,常规 IMRT QA 性能指标(伽玛通过率)与剂量误差之间缺乏相关性。因此,最常见的验收标准和已发表的行动水平对每位患者的 IMRT QA 预测能力不足,或者至少没有经过验证。

相似文献

引用本文的文献

本文引用的文献

3
Process control analysis of IMRT QA: implications for clinical trials.调强放疗质量保证的过程控制分析:对临床试验的影响
Phys Med Biol. 2008 Sep 21;53(18):5193-205. doi: 10.1088/0031-9155/53/18/023. Epub 2008 Aug 26.
6
A survey on planar IMRT QA analysis.一项关于平面调强放射治疗质量保证分析的调查。
J Appl Clin Med Phys. 2007 Jul 17;8(3):76-90. doi: 10.1120/jacmp.v8i3.2448.
9
Commissioning and quality assurance of treatment planning computers.治疗计划计算机的调试与质量保证
Int J Radiat Oncol Biol Phys. 1993 May 20;26(2):261-73. doi: 10.1016/0360-3016(93)90206-b.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验