Vrije Universiteit Brussel, Department of Chemical Engineering, Brussels, Belgium.
J Chromatogr A. 2011 Jul 15;1218(28):4406-16. doi: 10.1016/j.chroma.2011.05.018. Epub 2011 May 14.
The difference in B-term diffusion between fully porous and porous-shell particles is investigated using the physically sound diffusion equations originating from the Effective Medium Theory (EMT). Experimental data of the B-term diffusion obtained via peak parking measurements on six different commercial particle types have been analyzed (3 porous and 3 non porous). All particles were investigated using the same experimental design and test analytes, over a very broad range of retention factor values. First, the B-term reducing effect of the solid core (inducing an additional obstruction compared to fully porous particles) has been quantified using the Hashin-Shtrikman expression, showing that the presence of a solid core can account for a reduction of about 11% when the core diameter makes up 63% of the total particle diameter (Halo and Poroshell-particles) and a reduction of 16% when the core diameter makes up 73% (Kinetex). Remaining differences can be attributed to differences in the microscopic structure of the meso-porous material (meso-pore diameter, internal porosity or relative void volume). The much lower B-term diffusion of Halo and Kinetex particles compared to the fully porous Acquity particles (some 20-40% difference, of which about 10-15% can be attributed to the presence of the solid core) can hence largely be attributed to the much smaller internal porosity and the smaller pore size of the meso-porous material making up the shell of these particles.
使用源于有效介质理论(EMT)的物理合理扩散方程研究了全多孔和多孔壳颗粒之间的 B 项扩散差异。通过在六种不同商业颗粒类型上进行的峰停车测量获得的 B 项扩散实验数据进行了分析(3 种多孔和 3 种非多孔)。所有颗粒均使用相同的实验设计和测试分析物进行了研究,在非常宽的保留因子值范围内进行了研究。首先,使用 Hashin-Shtrikman 表达式量化了固体核的 B 项降低效应(与全多孔颗粒相比产生额外的阻碍),表明当核直径占总颗粒直径的 63%时,固体核的存在可以减少约 11%(Halo 和 Poroshell 颗粒),当核直径占 73%时,减少 16%(Kinetex)。其余差异可归因于中孔材料的微观结构差异(中孔直径、内部孔隙率或相对空隙体积)。与全多孔 Acquity 颗粒相比,Halo 和 Kinetex 颗粒的 B 项扩散低得多(差异约为 20-40%,其中约 10-15%可归因于固体核的存在),因此在很大程度上归因于较小的内部孔隙率和构成这些颗粒壳的中孔材料的较小孔径。