Centre for Nanotechnology & Advanced Biomaterials, SASTRA University, Thanjavur, Tamil Nadu, India.
Biomacromolecules. 2011 Sep 12;12(9):3156-65. doi: 10.1021/bm200618w. Epub 2011 Aug 11.
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, was electrospun to form defect-free fibers with high surface-area-to-volume ratio for skin regeneration. Several parameters such as solvent ratio, polymer concentration, applied voltage, flow rate, and tip-to-target distance were optimized to achieve defect-free morphology. The average diameter of the PHBV fibers was 724 ± 91 nm. PHBV was also solvent-cast to form 2-D films, and its mechanical properties, porosity, and degradation rates were compared with PHBV fibers. Our results demonstrate that PHBV fibers exhibited higher porosity, increased ductility, and faster degradation rate when compared with PHBV 2-D films (p < 0.05). In vitro studies with PHBV fibers and 2-D films were carried out to evaluate the adhesion, viability, proliferation, and gene expression of human skin fibroblasts. Cells adhered and proliferated on both PHBV fibers and 2-D films. However, the proliferation of cells on the surface of PHBV fibers was comparable to tissue culture polystyrene (TCPS, control) (p > 0.05). The gene expression of collagen I and elastin was significantly up-regulated when compared with TCPS control, whereas collagen III was down-regulated on PHBV fibers and 2-D film after 14 days in culture. The less ductile PHBV 2-D films showed higher levels of elastin expression. Furthermore, the PHBV fibers in the presence and absence of an angiogenesis factor (R-Spondin 1) were evaluated for their wound healing capacity in a rat model. The wound contracture in R-Spondin-1-loaded PHBV fibers was found to be significantly higher when compared with PHBV fibers alone after 7 days (p < 0.05). Furthermore, the presence of fibers promoted an increase in collagen and aided re-epithelialization. Thus our results demonstrate that the topography and mechanical and chemical stimuli have a pronounced influence on the cell proliferation, gene expression, and wound healing.
聚(3-羟基丁酸酯-共-3-羟基戊酸酯)(PHBV)是一种可生物降解的聚酯,可通过电纺形成具有高表面积与体积比的无缺陷纤维,用于皮肤再生。优化了几种参数,如溶剂比、聚合物浓度、施加电压、流速和针尖到靶的距离,以获得无缺陷的形态。PHBV 纤维的平均直径为 724 ± 91nm。还将 PHBV 旋涂成 2-D 薄膜,并比较了 PHBV 纤维与 PHBV 2-D 薄膜的机械性能、孔隙率和降解率。结果表明,与 PHBV 2-D 薄膜相比,PHBV 纤维表现出更高的孔隙率、增加的延展性和更快的降解率(p < 0.05)。进行了 PHBV 纤维和 2-D 薄膜的体外研究,以评估人皮肤成纤维细胞的粘附、活力、增殖和基因表达。细胞在 PHBV 纤维和 2-D 薄膜上均粘附和增殖。然而,与组织培养聚苯乙烯(TCPS,对照)相比,细胞在 PHBV 纤维表面的增殖可以相媲美(p > 0.05)。与 TCPS 对照相比,胶原蛋白 I 和弹性蛋白的基因表达显著上调,而在培养 14 天后,胶原蛋白 III 在 PHBV 纤维和 2-D 薄膜上的表达下调。较不柔韧的 PHBV 2-D 薄膜表现出更高水平的弹性蛋白表达。此外,还评估了含有和不含血管生成因子(R-Spondin 1)的 PHBV 纤维在大鼠模型中的伤口愈合能力。在第 7 天时,与单独的 PHBV 纤维相比,负载 R-Spondin-1 的 PHBV 纤维的伤口收缩明显更高(p < 0.05)。此外,纤维的存在促进了胶原蛋白的增加并有助于再上皮化。因此,我们的结果表明,形貌和机械及化学刺激对细胞增殖、基因表达和伤口愈合有显著影响。