Institute for Risk Assessment Sciences, Division Environmental Epidemiology, Utrecht University, Utrecht, the Netherlands.
Environ Health Perspect. 2012 Feb;120(2):185-91. doi: 10.1289/ehp.1103667. Epub 2011 Oct 20.
Measuring the oxidative potential of airborne particulate matter (PM) may provide a more health-based exposure measure by integrating various biologically relevant properties of PM into a single predictor of biological activity.
We aimed to assess the contrast in oxidative potential of PM collected at major urban streets and background locations, the associaton of oxidative potential with other PM characteristics, and the oxidative potential in different PM size fractions.
Measurements of PM with aerodynamic diameter ≤ 10 μm (PM10), PM with aerodynamic diameter ≤ 2.5 μm (PM2.5), soot, elemental composition, and oxidative potential of PM were conducted simultaneously in samples from 8 major streets and 10 urban and suburban background locations in the Netherlands. Six 1-week measurements were performed at each location over a 6-month period in 2008. Oxidative potential was measured as the ability to generate hydroxyl radicals in the presence of hydrogen peroxide in all PM10 samples and a subset of PM2.5 samples.
The PM10 oxidative potential of samples from major streets was 3.6 times higher than at urban background locations, exceeding the contrast for PM mass, soot, and all measured chemical PM characteristics. The contrast between major streets and suburban background locations was even higher (factor of 6.5). Oxidative potential was highly correlated with soot, barium, chromium, copper, iron, and manganese. Oxidative potential of PM10 was 4.6 times higher than the oxidative potential of PM2.5 when expressed per volume unit and 3.1 times higher when expressed per mass unit.
The oxidative potential of PM near major urban roads was highly elevated compared with urban and suburban background locations, and the contrast was greater than that for any other measured PM characteristic.
测量空气中颗粒物(PM)的氧化潜能可以将 PM 的各种与生物学相关的特性整合到一个单一的生物活性预测因子中,从而提供更基于健康的暴露测量。
我们旨在评估在主要城市街道和背景地点采集的 PM 的氧化潜能差异,氧化潜能与其他 PM 特性的关联,以及不同 PM 粒径分数中的氧化潜能。
在荷兰的 8 条主要街道和 10 个城市和郊区背景地点的样本中,同时进行了空气动力学直径≤10 μm(PM10)、空气动力学直径≤2.5 μm(PM2.5)、烟尘、元素组成和 PM 氧化潜能的测量。在 2008 年的 6 个月期间,每个地点进行了 6 次为期 1 周的测量。在所有 PM10 样本和 PM2.5 样本的一部分中,氧化潜能是通过在过氧化氢存在的情况下生成羟基自由基的能力来测量的。
主要街道样本的 PM10 氧化潜能是城市背景地点的 3.6 倍,超过了 PM 质量、烟尘和所有测量的化学 PM 特性的差异。主要街道和郊区背景地点之间的差异甚至更高(6.5 倍)。氧化潜能与烟尘、钡、铬、铜、铁和锰高度相关。以体积单位表示时,PM10 的氧化潜能是 PM2.5 的 4.6 倍,以质量单位表示时,是 PM2.5 的 3.1 倍。
与城市和郊区背景地点相比,主要城市道路附近的 PM 氧化潜能显著升高,且与任何其他测量的 PM 特性相比,差异更大。