Carlsson Anders S, Yilmaz Jenny Lindberg, Green Allan G, Stymne Sten, Hofvander Per
Department of Plant Breeding and Biotechnology, Swedish University of Agricultural Sciences Alnarp, Sweden.
Eur J Lipid Sci Technol. 2011 Jul;113(7):812-831. doi: 10.1002/ejlt.201100032.
Industrial chemicals and materials are currently derived mainly from fossil-based raw materials, which are declining in availability, increasing in price and are a major source of undesirable greenhouse gas emissions. Plant oils have the potential to provide functionally equivalent, renewable and environmentally friendly replacements for these finite fossil-based raw materials, provided that their composition can be matched to end-use requirements, and that they can be produced on sufficient scale to meet current and growing industrial demands. Replacement of 40% of the fossil oil used in the chemical industry with renewable plant oils, whilst ensuring that growing demand for food oils is also met, will require a trebling of global plant oil production from current levels of around 139 MT to over 400 MT annually. Realisation of this potential will rely on application of plant biotechnology to (i) tailor plant oils to have high purity (preferably >90%) of single desirable fatty acids, (ii) introduce unusual fatty acids that have specialty end-use functionalities and (iii) increase plant oil production capacity by increased oil content in current oil crops, and conversion of other high biomass crops into oil accumulating crops. This review outlines recent progress and future challenges in each of these areas.Practical applications: The research reviewed in this paper aims to develop metabolic engineering technologies to radically increase the yield and alter the fatty acid composition of plant oils and enable the development of new and more productive oil crops that can serve as renewable sources of industrial feedstocks currently provided by non-renewable and polluting fossil-based resources. As a result of recent and anticipated research developments we can expect to see significant enhancements in quality and productivity of oil crops over the coming decades. This should generate the technologies needed to support increasing plant oil production into the future, hopefully of sufficient magnitude to provide a major supply of renewable plant oils for the industrial economy without encroaching on the higher priority demand for food oils. Achievement of this goal will make a significant contribution to moving to a sustainable carbon-neutral industrial society with lower emissions of carbon dioxide to the atmosphere and reduced environmental impact as a result.
工业化学品和材料目前主要来源于化石基原料,这些原料的供应正在减少,价格不断上涨,并且是不良温室气体排放的主要来源。植物油有潜力为这些有限的化石基原料提供功能等效、可再生且环境友好的替代品,前提是其成分能够符合最终用途的要求,并且能够实现足够规模的生产以满足当前及不断增长的工业需求。用可再生植物油替代化学工业中40%的化石油,同时确保满足对食用油不断增长的需求,这将需要全球植物油产量从目前约1.39亿吨的水平每年增至超过4亿吨,即增至三倍。要实现这一潜力,将依赖于植物生物技术的应用,以(i)使植物油具有高纯度(最好>90%)的单一所需脂肪酸,(ii)引入具有特殊最终用途功能的特殊脂肪酸,以及(iii)通过提高现有油料作物的含油量,以及将其他高生物量作物转化为产油作物来提高植物油生产能力。本综述概述了这些领域各自的最新进展和未来挑战。
本文所综述的研究旨在开发代谢工程技术,从根本上提高植物油的产量并改变其脂肪酸组成,从而培育出新型且更高产的油料作物,这些作物可作为目前由不可再生且污染环境的化石基资源提供的工业原料的可再生来源。由于近期及预期的研究进展,我们有望在未来几十年看到油料作物的质量和产量大幅提高。这将产生支持未来植物油产量增长所需的技术,有望达到足够的规模,为工业经济提供大量可再生植物油供应,同时不影响对食用油的更高优先级需求。实现这一目标将为迈向可持续的碳中和工业社会做出重大贡献,从而减少向大气中排放的二氧化碳,并降低对环境的影响。