T. J. Watson Laboratory of Applied Physics, California Institute of Technology, Pasadena, CA 91125, USA.
Nat Commun. 2012 May 29;3:867. doi: 10.1038/ncomms1876.
Light propagation through an optical fibre causes a long, non-resonant (true) time delay used in numerous applications. In contrast to how it is deployed in optical communication systems, fibre is coiled in these applications to reduce footprint. This is a configuration better suited for a chip-based waveguide that would improve shock resistance, and afford the possibility of integration for system-on-a-chip functionality. However, integrated waveguide attenuation rates lag far behind the corresponding rates of optical fibre, featuring attenuation many orders larger. Here we demonstrate a monolithic waveguide as long as 27 m (39 m optical path length), and featuring broadband loss rate values of (0.08±0.01) dB m(-1) measured over 7 m by optical backscatter. Resonator measurements show a further reduction of loss to 0.037 dB m(-1), close to that of optical fibres when first considered a viable technology. Scaling this waveguide to integrated spans exceeding 250 m and attenuation rates below 0.01 dB m(-1) is discussed.
光通过光纤传播会产生一个长的、非共振(真实)的时间延迟,这在许多应用中都有使用。与在光通信系统中的应用方式不同,在这些应用中,光纤被盘绕起来以减小占用空间。这种配置更适合基于芯片的波导,因为它可以提高抗冲击性,并为片上系统功能的集成提供可能性。然而,集成波导的衰减率远远落后于光纤的相应速率,其衰减幅度大几个数量级。在这里,我们展示了一个长达 27 米(39 米光程)的单片波导,通过光背向散射在 7 米的范围内测量到的宽带损耗率值为(0.08±0.01)dB m(-1)。谐振器测量显示,损耗进一步降低到 0.037 dB m(-1),接近最初被认为可行的技术的光纤损耗率。讨论了将这种波导扩展到超过 250 米的集成跨度和低于 0.01 dB m(-1)的衰减率。