Suppr超能文献

取回的钽增强人体组织的体外组织学分析。

Histological ex vivo analysis of retrieved human tantalum augmentations.

机构信息

Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestraße 59, 22529 Hamburg, Germany.

出版信息

Int Orthop. 2012 Nov;36(11):2269-74. doi: 10.1007/s00264-012-1640-4. Epub 2012 Aug 15.

Abstract

PURPOSE

The characteristics of tantalum augment osseointegration in human ex vivo specimens from re-revision procedures are unknown and limited data in this regard is available. The purpose of this study was to investigate the osseointegration pattern into porous tantalum augmentations harvested during re-revision procedures.

METHODS

Between 2007 and 2010 a total of 324 hip and knee revisions with a tantalum augmentation were performed in our institution. Out of this cohort, seven patients (2.2 %) had to be re-revised. To analyse the status of trabecular ingrowth in the retrieved cases (four hips, three knees), all specimens were analysed by contact radiography, subjected to undecalcified processing, histology, thin-section analysis and backscattered electron imaging.

RESULTS

Trabecular and vascular ingrowth could be found along the bone-augment-interface in two of seven revised specimens, respectively. The depth of bone ingrowth reached up to 2.6 mm. However, the analysis of the remaining cases revealed no bony ingrowth into trabecular metal. Rather, large parts of the implants were embedded in cement or pores were filled with autologous bone.

CONCLUSIONS

Although the cause for the missing bony ingrowth seems to be multifactorial, some fundamental conditions, such as the provision of the greatest possible interface between the tantalum implant and the host bone, should be met and thus, bone cement and autologous bone grafts should be used with caution.

摘要

目的

在翻修手术中从人体尸检标本中获得的钽增强物的骨整合特征尚不清楚,这方面的可用数据有限。本研究的目的是研究从翻修手术中采集的多孔钽增强物的骨整合模式。

方法

2007 年至 2010 年,我们机构共进行了 324 例髋关节和膝关节翻修手术,其中有钽增强物。在这一组中,有 7 名患者(2.2%)需要再次翻修。为了分析回收标本中(4 个髋关节,3 个膝关节)的小梁内生长情况,所有标本均通过接触放射摄影进行分析,并进行非脱钙处理、组织学、薄切片分析和背散射电子成像。

结果

在 7 例再次翻修的标本中,有 2 例分别在骨-增强界面处发现了小梁和血管的内生长。骨内生长的深度达到 2.6 毫米。然而,对其余病例的分析显示,没有骨小梁进入金属小梁。相反,大部分植入物被水泥包裹,或孔隙被自体骨填充。

结论

尽管骨内生长缺失的原因似乎是多因素的,但一些基本条件,如提供钽植入物和宿主骨之间尽可能大的界面,应该得到满足,因此,骨水泥和自体骨移植物的使用应谨慎。

相似文献

1
Histological ex vivo analysis of retrieved human tantalum augmentations.取回的钽增强人体组织的体外组织学分析。
Int Orthop. 2012 Nov;36(11):2269-74. doi: 10.1007/s00264-012-1640-4. Epub 2012 Aug 15.
2
Removal of a well-fixed trabecular metal monoblock tibial component.取出固定良好的小梁金属一体式胫骨部件。
J Arthroplasty. 2008 Jun;23(4):619-22. doi: 10.1016/j.arth.2007.05.004. Epub 2007 Nov 9.

引用本文的文献

1
Carpal bone replacement using personalized 3D printed tantalum prosthesis.使用个性化3D打印钽假体进行腕骨置换。
Front Bioeng Biotechnol. 2023 Oct 30;11:1234052. doi: 10.3389/fbioe.2023.1234052. eCollection 2023.

本文引用的文献

4
Acetabular revisions using trabecular metal cups and augments.使用多孔金属杯和加强物进行髋臼翻修。
J Arthroplasty. 2009 Sep;24(6 Suppl):64-8. doi: 10.1016/j.arth.2009.02.001. Epub 2009 Apr 1.
6
Modular tantalum augments for acetabular defects in revision hip arthroplasty.用于髋关节翻修术中髋臼缺损的模块化钽增强物。
Clin Orthop Relat Res. 2009 Jan;467(1):199-205. doi: 10.1007/s11999-008-0549-0. Epub 2008 Oct 16.
10
The use of tantalum porous metal implants for Paprosky 3A and 3B defects.钽多孔金属植入物用于Paprosky 3A和3B型缺损。
J Arthroplasty. 2007 Sep;22(6 Suppl 2):151-5. doi: 10.1016/j.arth.2007.04.024. Epub 2007 Jul 27.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验