Suppr超能文献

PI3K/Akt 信号通路在调节 MC3T3-E1 前成骨细胞在 SLA 和 SLActive 钛表面增殖和分化中的作用。

The roles of PI3K/Akt signaling pathway in regulating MC3T3-E1 preosteoblast proliferation and differentiation on SLA and SLActive titanium surfaces.

机构信息

Department of Oral and Maxillo-Facial Implantology, Shanghai Ninth People's Hospital, School of Medicine, Shanghai Jiaotong University, Shanghai, China.

出版信息

J Biomed Mater Res A. 2013 Mar;101(3):748-54. doi: 10.1002/jbm.a.34377. Epub 2012 Aug 31.

Abstract

Chemical modification to produce a hydrophilic microrough titanium (Ti) implant surface has been shown to increase osseointegration compared with microrough topography alone. This study aimed to investigate the roles of PI3K/Akt signaling pathway in regulating proliferation and differentiation of osteoblasts in response to surface microroughness and hydrophilicity. Ti disks were manufactured to present different surface morphologies: a smooth pretreatment surface (PT), a rough hydrophobic surface that was sand-blasted, large-grit, acid-etched (SLA), and an SLA surface with the same roughness that was chemically modified to possess high wettability/hydrophilicity (SLActive/modSLA). MC3T3-E1 cells were cultured on these substrates with or without LY294002, a PI3K inhibitor, and their behaviors, including cell viability (MTT colorimetric assay), alkaline phosphatase (ALP) activity, and osteogenic genes expression of osteopontin (OPN) and osteocalcin (OCN) were measured. Western blot was applied to detect the expression of PI3K/Akt signal pathway proteins. The results showed that a decrease in osteoblast proliferation associated with the Ti surfaces (SLActive > SLA > PT) correlated with an increase in activity of the osteogenic differentiation markers ALP. The peak of ALP activity appeared earlier at 7 days for the SLActive surfaces compared with the SLA and PT surfaces. Osteoblast proliferation, as well as the level of p-Akt, was significantly inhibited by LY294002 in all three Ti surfaces. The top value of ALP activity was increased with the inhibition of PI3K/Akt signaling pathway while the time of the peak appeared was not advanced. The expression levels of OPN and OCN were upregulated by the effect of surface roughness and hydrophilicity, which were further enhanced by LY294002. In conclusion, osteogenic responses to SLActive surface were moderately better than the SLA surface and protein expression studies indicated that PI3K/Akt signaling activation may be responsible for this increased osteogenic differentiation. Surface microroughness and hydrophilicity may affect osteoblast functions by targeting osteoblast proliferation and the early stage of osteoblast differentiation through PI3K/Akt signaling pathway.

摘要

化学修饰产生亲水的微粗糙钛(Ti)植入物表面已被证明与单独的微粗糙形貌相比,可增加骨整合。本研究旨在探讨 PI3K/Akt 信号通路在调节成骨细胞对表面微粗糙度和亲水性的增殖和分化中的作用。制造 Ti 盘以呈现不同的表面形态:光滑预处理表面(PT)、喷砂、大粒度、酸蚀的粗糙疏水面(SLA)和具有相同粗糙度的经化学修饰具有高润湿性/亲水性的 SLA 表面(SLActive/modSLA)。将 MC3T3-E1 细胞在这些基底上培养,有或没有 LY294002(PI3K 抑制剂),并测量它们的行为,包括细胞活力(MTT 比色法)、碱性磷酸酶(ALP)活性和骨钙素(OCN)的成骨基因表达。应用 Western blot 检测 PI3K/Akt 信号通路蛋白的表达。结果表明,与 Ti 表面(SLActive>SLA>PT)相关的成骨细胞增殖减少与成骨分化标志物 ALP 的活性增加相关。与 SLA 和 PT 表面相比,SLActive 表面的 ALP 活性峰值更早出现在第 7 天。在所有三种 Ti 表面上,LY294002 显著抑制成骨细胞增殖以及 p-Akt 的水平。抑制 PI3K/Akt 信号通路后,ALP 活性的最高值增加,而峰值出现的时间并未提前。OPN 和 OCN 的表达水平因表面粗糙度和亲水性的影响而上调,LY294002 进一步增强了这一上调。总之,SLActive 表面的成骨反应略优于 SLA 表面,蛋白质表达研究表明,PI3K/Akt 信号激活可能是这种增强的成骨分化的原因。表面微粗糙度和亲水性可能通过 PI3K/Akt 信号通路靶向成骨细胞增殖和早期成骨细胞分化来影响成骨细胞功能。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验