Department of Mechanical Engineering, University of Canterbury, Christchurch, New Zealand.
BMC Pulm Med. 2012 Sep 21;12:59. doi: 10.1186/1471-2466-12-59.
Mechanical ventilation (MV) is the primary form of support for acute respiratory distress syndrome (ARDS) patients. However, intra- and inter- patient-variability reduce the efficacy of general protocols. Model-based approaches to guide MV can be patient-specific. A physiological relevant minimal model and its patient-specific performance are tested to see if it meets this objective above.
Healthy anesthetized piglets weighing 24.0 kg [IQR: 21.0-29.6] underwent a step-wise PEEP increase manoeuvre from 5cmH2O to 20cmH2O. They were ventilated under volume control using Engström Care Station (Datex, General Electric, Finland), with pressure, flow and volume profiles recorded. ARDS was then induced using oleic acid. The data were analyzed with a Minimal Model that identifies patient-specific mean threshold opening and closing pressure (TOP and TCP), and standard deviation (SD) of these TOP and TCP distributions. The trial and use of data were approved by the Ethics Committee of the Medical Faculty of the University of Liege, Belgium.
3 of the 9 healthy piglets developed ARDS, and these data sets were included in this study. Model fitting error during inflation and deflation, in healthy or ARDS state is less than 5.0% across all subjects, indicating that the model captures the fundamental lung mechanics during PEEP increase. Mean TOP was 42.4cmH2O [IQR: 38.2-44.6] at PEEP = 5cmH2O and decreased with PEEP to 25.0cmH2O [IQR: 21.5-27.1] at PEEP = 20cmH2O. In contrast, TCP sees a reverse trend, increasing from 10.2cmH2O [IQR: 9.0-10.4] to 19.5cmH2O [IQR: 19.0-19.7]. Mean TOP increased from average 21.2-37.4cmH2O to 30.4-55.2cmH2O between healthy and ARDS subjects, reflecting the higher pressure required to recruit collapsed alveoli. Mean TCP was effectively unchanged.
The minimal model is capable of capturing physiologically relevant TOP, TCP and SD of both healthy and ARDS lungs. The model is able to track disease progression and the response to treatment.
机械通气(MV)是急性呼吸窘迫综合征(ARDS)患者的主要支持形式。然而,患者内和患者间的可变性降低了一般方案的疗效。基于模型的方法可以指导 MV 以适应患者个体差异。本文测试了一个生理相关的最小模型及其对患者个体的性能,以确定其是否能达到上述目标。
健康麻醉小猪体重 24.0kg[IQR:21.0-29.6],逐步从 5cmH2O 增加到 20cmH2O 的 PEEP 水平,使用容积控制通气,记录压力、流量和容积曲线。然后使用油酸诱导 ARDS。使用最小模型分析数据,该模型可以识别患者特定的平均开放和关闭压力(TOP 和 TCP)以及这些 TOP 和 TCP 分布的标准差(SD)。该试验和数据使用得到了比利时列日大学医学系伦理委员会的批准。
9 只健康小猪中有 3 只发展为 ARDS,这些数据集被纳入本研究。在健康或 ARDS 状态下,充气和放气过程中的模型拟合误差小于 5.0%,表明模型在 PEEP 增加过程中捕获了基本的肺力学。在 PEEP=5cmH2O 时,平均 TOP 为 42.4cmH2O[IQR:38.2-44.6],随着 PEEP 的增加,TOP 降低至 25.0cmH2O[IQR:21.5-27.1]。相反,TCP 呈现相反的趋势,从 10.2cmH2O[IQR:9.0-10.4]增加到 19.5cmH2O[IQR:19.0-19.7]。在健康和 ARDS 患者之间,平均 TOP 从 21.2-37.4cmH2O 增加到 30.4-55.2cmH2O,反映了募集塌陷肺泡所需的更高压力。平均 TCP 基本不变。
最小模型能够捕获健康和 ARDS 肺部的生理相关 TOP、TCP 和 SD。该模型能够跟踪疾病进展和对治疗的反应。