Health and Environmental Sciences, DuPont Company, Wilmington, DE 19805, USA.
Crit Rev Toxicol. 2012 Nov;42(10):793-826. doi: 10.3109/10408444.2012.725028. Epub 2012 Sep 27.
Dimethylacetamide (DMAC) and dimethylformamide (DMF) continue to be important, widely used solvents involved in a wide variety of industrial applications. As liquids with relatively low vapor pressures, contact with both the integumentary and respiratory systems is the main source of human exposure. Although airborne control levels for the workplace have been established and industrial hygiene practices to limit dermal contact have been put in place, use of these chemicals has been associated with occupational illness, mainly in Asia where new and expanded uses have led to overexposures. Thus an update of the basic toxicology data including tables indicating the dose/exposure response characteristics of both DMAC and DMF is currently important. Both chemicals are similar from a toxicology perspective. Human experience has generally shown the materials to be without adverse effect except under conditions where airborne and dermal controls were not properly applied. The use of urinary metabolite monitoring has successfully been employed to measure integrated dermal and inhalation worker exposure. The chemicals are not particularly toxic following acute exposure but high doses can produce damage to the liver, the organ which is first affected by these two chemicals. Repeated dose/exposure studies have characterized both the targets of toxicity and the doses required to produce changes by various routes of exposure. Higher doses of these materials can produce changes in developing systems, infrequently in experiments at doses in which the maternal animal is unaffected, thus care needs to be taken when exposures are to women of child-bearing age. The chemicals appear to be low in genetic activity and inhalation exposures have not shown the materials to produce tumors in rodents except with DMF in a situation in which aerosol formation was encountered. This presentation extends the two previous reviews and, like those, includes updated information on acetamide and formamide and their monomethyl derivatives as well as the commercially important DMAC and DMF. Since a large portion of the newer information deals with effects in humans and biomonitoring, these sections are presented at the start of this review.
二甲基乙酰胺 (DMAC) 和二甲基甲酰胺 (DMF) 仍然是重要的、广泛使用的溶剂,涉及各种工业应用。由于它们的蒸汽压相对较低,因此与皮肤和呼吸系统的接触是人体暴露的主要来源。虽然已经为工作场所建立了空气传播控制水平,并采取了工业卫生措施来限制皮肤接触,但这些化学物质的使用与职业疾病有关,主要在亚洲,新的和扩大的用途导致了过度暴露。因此,更新基本毒理学数据包括表明 DMAC 和 DMF 的剂量/暴露反应特征的表格目前非常重要。从毒理学角度来看,这两种化学物质非常相似。人类经验通常表明,这些材料除了在空气传播和皮肤控制不当的情况下没有不良影响。使用尿代谢物监测成功地用于测量综合皮肤和吸入工人暴露。这些化学物质在急性暴露后并不特别有毒,但高剂量会对肝脏造成损害,肝脏是首先受到这两种化学物质影响的器官。重复剂量/暴露研究已经描述了毒性的靶标以及通过各种暴露途径产生变化所需的剂量。这些材料的高剂量会导致发育系统发生变化,在母体动物不受影响的实验中很少会在剂量下发生变化,因此需要谨慎对待处于生育年龄的女性的暴露。这些化学物质的遗传活性似乎较低,吸入暴露不会在啮齿动物中产生肿瘤,除非在遇到气溶胶形成的情况下使用 DMF。本报告扩展了前两次审查,并与前两次审查一样,包括乙酰胺和甲酰胺及其单甲基衍生物以及商业上重要的 DMAC 和 DMF 的最新信息。由于大部分较新的信息涉及人类和生物监测的影响,因此这些部分在本综述的开头呈现。