Department of Orthopedic Surgery, University of Kansas Medical Center, Kansas City, Kansas, USA.
J Bone Joint Surg Am. 2012 Nov 7;94(21):1946-51. doi: 10.2106/JBJS.L.00014.
Antibiotic bone cement is commonly used in staged revision arthroplasty as well as the treatment of open fractures. Multiple factors affect antibiotic elution from bone cement. This study was performed to investigate the effect of two variables, the quantity of liquid monomer and the timing of antibiotic addition, on the ultimate elution of antibiotic from bone cement.
Vancomycin-loaded Simplex P and SmartSet MV bone cement was prepared with three different methods: a common surgical technique, a mixing technique that doubled the amount of liquid monomer, and a novel technique that delayed antibiotic addition until after thirty seconds of polymerization. Cylinders of a standardized size were created from each preparation. The elution profiles of five cylinders from each preparation were measured over six weeks with use of high-performance liquid chromatography. Cylinders were tested in compression to quantify strength.
Delayed antibiotic addition resulted in significantly greater cumulative elution over six weeks (p < 0.0001), with minimal reduction in strength, compared with the other groups. Doubling the liquid monomer significantly reduced cumulative elution over six weeks compared with either of the other techniques (p < 0.0001). Vancomycin elution from Simplex P was 52%greater and vancomycin elution from SmartSet MV was 25% greater in the delayed-antibiotic-addition groups than it was in the corresponding standard surgical technique groups. The majority of the antibiotic was released over the first week in all groups. : High-dose-antibiotic bone cement prepared with delayed antibiotic addition increased vancomycin elution compared with the standard surgical preparation. Incorporating additional liquid monomer decreased vancomycin elution from high-dose-antibiotic cement. We recommend preparing high-dose-antibiotic bone cement with the delayed-antibiotic addition technique and not incorporating additional liquid monomer.
Both the relative volume of liquid monomer and the timing of antibiotic addition have substantial effects on the elution of antibiotic from bone cement.
抗生素骨水泥常用于分期翻修关节成形术和开放性骨折的治疗。多种因素会影响骨水泥中抗生素的洗脱。本研究旨在探讨两个变量,即液体单体的量和抗生素添加时间,对骨水泥中抗生素最终洗脱的影响。
使用三种不同方法制备载万古霉素的 Simplex P 和 SmartSet MV 骨水泥:一种普通手术技术、一种将液体单体量加倍的混合技术和一种将抗生素添加延迟到聚合后 30 秒的新方法。从每种制备方法中制作出标准化尺寸的圆柱体。使用高效液相色谱法在六周内测量来自每个制备方法的五个圆柱体的洗脱曲线。对圆柱体进行压缩测试以量化强度。
与其他组相比,延迟抗生素添加导致六周内累积洗脱量显著增加(p < 0.0001),但强度降低最小。与其他两种技术相比,将液体单体加倍可显著减少六周内的累积洗脱量(p < 0.0001)。与相应的标准手术技术组相比,延迟抗生素添加组中 Simplex P 的万古霉素洗脱量增加了 52%,而 SmartSet MV 的万古霉素洗脱量增加了 25%。在所有组中,大部分抗生素在第一周内释放。
用延迟抗生素添加制备的高剂量抗生素骨水泥与标准手术制剂相比,增加了万古霉素洗脱。加入额外的液体单体可减少高剂量抗生素骨水泥中的万古霉素洗脱。我们建议采用延迟抗生素添加技术制备高剂量抗生素骨水泥,并且不加入额外的液体单体。
液体单体的相对体积和抗生素添加时间都对骨水泥中抗生素的洗脱有很大影响。