Department of Plastic and Reconstructive Surgery, Royal Free London NHS Foundation Trust Hospital, and UCL Centre for Nanotechnology & Regenerative Medicine, University College London, London, UK.
J Plast Reconstr Aesthet Surg. 2013 Jun;66(6):835-8. doi: 10.1016/j.bjps.2013.02.006. Epub 2013 Apr 1.
Hypospadias is the most common congenital condition affecting between 1 in 250 and 300 live births. Even in experienced hands, surgery to repair this congenital defect can have a high complication rate. Wound dehiscence is reported to occur in 5% and fistula formation in 6%-40% depending on technique. The choice of suture material has been shown to affect the complication rate although there is (currently) no consensus about the best suture material to use. Ideally, the sutures used for urethroplasty should be absorbable while maintaining sufficient mechanical strength to support the wounds until they are self-supporting and able to resist urinary flow. Previous studies have compared the effects of human urine on different suture materials especially catgut. However, catgut is now banned in Europe. Our study examined the tensile and breaking strength as well as rate of degradation for four types of absorbable suture now commonly used for hypospadias repairs in the UK.
We examined the effect of prolonged storage (up to 27 days) in human urine on 6/0 gauge Vicryl, Vicryl Rapide, Monocryl and polydioxanone (PDS) sutures. These four suture materials are commonly used by the senior plastic consultant surgeon (NK) for hypospadias repairs. 50 mm sections of these suture materials were stored in either urine or saline as control. At specified time points, each suture was placed in a uniaxial load testing machine to assess the stress-strain profile and the mechanical load required to break the suture was measured.
Exposure to urine reduced the tensile and breaking strength of all the suture materials tested. PDS demonstrated the greatest resilience. Vicryl Rapide was the weakest suture and degraded completely by day 6. Vicryl and Monocryl had similar degradation profiles, but Vicryl retained more of its tensile strength for longer.
There is a balance to be struck between the duration that a suture material must remain in any surgical wound and the risk that it causes foreign body effects. The results of this study suggest that Vicryl has the best characteristics for urethroplasty of the four suture materials tested.
尿道下裂是最常见的先天性疾病,影响每 250 至 300 例活产儿中的 1 例。即使在有经验的医生手中,修复这种先天性缺陷的手术也可能有很高的并发症发生率。据报道,根据技术的不同,伤口裂开的发生率为 5%,瘘管形成的发生率为 6%-40%。缝线材料的选择已被证明会影响并发症的发生率,尽管目前对于使用哪种最佳缝线材料尚无共识。理想情况下,用于尿道成形术的缝线应该是可吸收的,同时保持足够的机械强度,以支撑伤口,直到它们能够自行支撑并能够抵抗尿液流动。先前的研究比较了不同缝线材料,特别是肠线在人类尿液中的影响。然而,肠线现在在欧洲已被禁用。我们的研究检查了在英国常用于尿道下裂修复的四种可吸收缝线(6/0 号薇乔、薇乔快薇乔、单乔和聚二氧杂环已酮(PDS))在长时间(长达 27 天)储存于人类尿液中的拉伸和断裂强度以及降解速度。这四种缝线材料均由资深整形外科顾问医师(NK)用于尿道下裂修复。将这些缝线材料的 50mm 段分别储存在尿液或盐水中作为对照。在特定的时间点,将每种缝线放入单轴载荷试验机中,以评估其应力-应变曲线,并测量断裂缝线所需的机械载荷。
暴露于尿液会降低所有测试缝线材料的拉伸和断裂强度。PDS 表现出最大的弹性。薇乔快薇乔是最脆弱的缝线,在第 6 天完全降解。薇乔和单乔的降解曲线相似,但薇乔在更长时间内保持更多的拉伸强度。
缝线材料在任何手术伤口中保持的时间与它引起异物反应的风险之间需要取得平衡。本研究结果表明,在测试的四种缝线材料中,薇乔具有最佳的尿道成形术特性。