Suppr超能文献

圆锥角膜前后角膜形态的相关性。

Correlation of anterior and posterior corneal shape in keratoconus.

机构信息

Instituto Oftalmológico de Alicante, Vissum Corporation, Alicante, Spain.

出版信息

Cornea. 2013 Jul;32(7):916-21. doi: 10.1097/ICO.0b013e3182904950.

Abstract

PURPOSE

To evaluate the correlation of the mean curvature and shape factors of both corneal surfaces for different corneal diameters measured with the Scheimpflug photography-based system in keratoconus eyes.

METHODS

A total of 61 keratoconus eyes of 61 subjects, aged 14 to 64 years, were included in this study. All eyes received a comprehensive ophthalmologic examination including anterior segment and corneal analysis with the Sirius system (CSO): anterior and posterior mean corneal radius for 3, 5, and 7 mm (aKM, pKM), anterior and posterior mean shape factor for 4.5 and 8 mm (ap, pp), central and minimal corneal thickness, and anterior chamber depth.

RESULTS

Mean aKM/pKM ratio around 1.20 (range, 0.95-1.48) was found for all corneal diameters (P = 0.24). Weak but significant correlations of this ratio with pachymetric parameters were found (r between -0.28 and -0.34, P < 0.04). The correlation coefficient between aKM and pKM was ≥ 0.92 for all corneal diameters. A strong and significant correlation was also found between ap and pp (r ≥ 0.86, P < 0.01). The multiple regression analysis revealed that central pKM was significantly correlated with aKM, central corneal thickness, anterior chamber depth, and spherical equivalent (R ≥ 0.88, P < 0.01) and that 8 mm pp was significantly correlated with 8 mm ap and age (R = 0.89, P < 0.01).

CONCLUSIONS

Central posterior corneal curvature and shape factor in the keratoconus eye can be consistently predicted from the anterior corneal curvature and shape factor, respectively, in combination with other anatomical and ocular parameters.

摘要

目的

评估基于 Scheimpflug 摄影系统测量的不同角膜直径下角膜表面平均曲率和形状因子的相关性在圆锥角膜眼中。

方法

本研究共纳入 61 名年龄在 14 至 64 岁的圆锥角膜患者的 61 只眼。所有患者均接受了全面的眼科检查,包括眼前节和角膜分析,使用 Sirius 系统(CSO):3、5 和 7mm 的前、后角膜平均半径(aKM、pKM),4.5 和 8mm 的前、后角膜平均形状因子(ap、pp),中央和最小角膜厚度以及前房深度。

结果

所有角膜直径的平均 aKM/pKM 比值约为 1.20(范围,0.95-1.48)(P=0.24)。该比值与角膜厚度参数之间存在微弱但有统计学意义的相关性(r 值在-0.28 到-0.34 之间,P<0.04)。所有角膜直径的 aKM 和 pKM 之间的相关系数均≥0.92。ap 和 pp 之间也存在很强的显著相关性(r 值≥0.86,P<0.01)。多元回归分析显示,中央角膜 pKM 与 aKM、中央角膜厚度、前房深度和等效球镜(R≥0.88,P<0.01)显著相关,8mm pp 与 8mm ap 和年龄(R=0.89,P<0.01)显著相关。

结论

圆锥角膜眼中的中央后角膜曲率和形状因子可以分别从前角膜曲率和形状因子,结合其他解剖和眼部参数来进行预测。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验