Herrmann Tarrah A, Siefert Andrew W, Pressman Gregg S, Gollin Hannah R, Touchton Steven A, Saikrishnan Neelakantan, Yoganathan Ajit P
The Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, Atlanta, GA 30332, USA.
J Biomech Eng. 2013 Sep;135(9):94502. doi: 10.1115/1.4024579.
Mitral annular calcification (MAC) involves calcium deposition in the fibrous annulus supporting the mitral valve (MV). When calcification extends onto the leaflets, valve opening can be restricted. The influence of MAC MV geometry on Doppler gradients is unknown. This study describes a novel methodology to rapid-prototype subject-specific MAC MVs. Replicated valves were used to assess the effects of distorted annular-leaflet geometry on Doppler-derived, transmitral gradients in comparison to direct pressure measurements and to determine if transmitral gradients vary according to measurement location. Three-dimensional echocardiography data sets were selected for two MAC MVs and one healthy MV. These MVs were segmented and rapid prototyped in their middiastolic configuration for in vitro testing. The effects of MV geometry, measurement modality, and measurement location on transmitral pressure gradient were assessed by Doppler and catheter at three locations along the MV's intercommissural axis. When comparing dimensions of the rapid-prototyped valves to the subject echocardiography data sets, mean relative errors ranged from 6.2% to 35%. For the evaluated MVs, Doppler pressure gradients exhibited good agreement with catheter-measured gradients at a variety of flow rates, though with slight systematic overestimation in the recreated MAC valves. For all of the tested MVs, measuring the transmitral pressure gradient at differing valve orifice positions had minimal impact on observed gradients. Upon the testing of additional normal and calcific MVs, these data may contribute to an improved clinical understanding of MAC-related mitral stenosis. Moreover, they provide the ability to statistically evaluate between measurement locations, flow rates, and valve geometries for Doppler-derived pressure gradients. Determining these end points will contribute to greater clinical understanding for the diagnosis MAC patients and understanding the use and application of Doppler echocardiography to estimate transmitral pressure gradients.
二尖瓣环钙化(MAC)涉及钙在支撑二尖瓣(MV)的纤维环中的沉积。当钙化延伸到瓣叶上时,瓣膜开放可能会受到限制。MAC二尖瓣几何形状对多普勒梯度的影响尚不清楚。本研究描述了一种快速制作特定个体MAC二尖瓣的新方法。与直接压力测量相比,使用复制的瓣膜评估环形瓣叶几何形状扭曲对多普勒衍生的跨二尖瓣梯度的影响,并确定跨二尖瓣梯度是否根据测量位置而变化。为两个MAC二尖瓣和一个健康二尖瓣选择了三维超声心动图数据集。这些二尖瓣在舒张中期构型下进行分割和快速成型,用于体外测试。通过多普勒和导管在二尖瓣连合间轴的三个位置评估二尖瓣几何形状、测量方式和测量位置对跨二尖瓣压力梯度的影响。将快速成型瓣膜的尺寸与受试者超声心动图数据集进行比较时,平均相对误差范围为6.2%至35%。对于评估的二尖瓣,在各种流速下,多普勒压力梯度与导管测量的梯度表现出良好的一致性,尽管在重建的MAC瓣膜中存在轻微的系统性高估。对于所有测试的二尖瓣,在不同瓣膜口位置测量跨二尖瓣压力梯度对观察到的梯度影响最小。在测试更多正常和钙化二尖瓣后,这些数据可能有助于提高对MAC相关二尖瓣狭窄的临床理解。此外,它们提供了对多普勒衍生压力梯度的测量位置、流速和瓣膜几何形状进行统计评估的能力。确定这些终点将有助于更好地临床理解MAC患者的诊断以及理解多普勒超声心动图在估计跨二尖瓣压力梯度方面的使用和应用。