Department of Dentistry, College of Medicine, University of Ulsan, Asan Medical Center, Seoul, Republic of Korea.
J Adv Prosthodont. 2013 Aug;5(3):262-9. doi: 10.4047/jap.2013.5.3.262. Epub 2013 Aug 31.
Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer.
CIE color coordinates, such as L*, a* and b*,of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA.
Shifts in color and color coordinates were influenced by three factors (P<.05). Color shifts by the switch to A were in the range of 5.9 to 7.7 ΔEab units, and those by the switch to F9 were 7.7 to 10.2; all of which were unacceptable (ΔE*ab > 5.5). When switched to A, CIE a increased (Δa*: 5.6 to 7.6), however, CIE b* increased (Δb*: 4.9 to 7.8) when switched to F9.
Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition.
陶瓷的感知颜色会随环境光的光谱功率分布而改变。本研究旨在使用人眼模拟分光辐射计量化七种临床模拟全瓷因三种环境光源切换而导致的颜色和颜色坐标变化量。
在三种光源下测量陶瓷样本的 CIE 颜色坐标,如 L*、a和 b,这三种光源分别模拟 CIE 标准照明体 D65(日光)、A(白炽灯)和 F9(荧光灯)。确定灯光切换时的颜色和颜色坐标变化。通过三因素方差分析(P<.05)分析切换光源(D65 至 A,或 D65 至 F9)、饰面陶瓷的色调(A2 或 A3)和陶瓷品牌对变化的影响。
颜色和颜色坐标的变化受三个因素的影响(P<.05)。切换至 A 时的颜色变化范围为 5.9 至 7.7 ΔEab 单位,切换至 F9 时为 7.7 至 10.2;所有这些变化均不可接受(ΔE*ab > 5.5)。切换至 A 时,CIE a增加(Δa*:5.6 至 7.6),而切换至 F9 时,CIE b增加(Δb:4.9 至 7.8)。
根据分光辐射计读数,临床模拟陶瓷在环境光切换时表现出临床不可接受的颜色变化。因此,应考虑环境照明条件并在最相关的照明条件下进行比色和兼容性评估。