Suppr超能文献

血管造影 C 臂 CT 与 MDCT 引导下肝脏病变立体定向穿刺:非刚性体模研究。

Angiographic C-arm CT- versus MDCT-guided stereotactic punctures of liver lesions: nonrigid phantom study.

机构信息

1 Section of Microinvasive Therapy, Department of Radiology, Innsbruck Medical University, Anichstrasse 35, A-6020 Innsbruck, Austria.

出版信息

AJR Am J Roentgenol. 2013 Nov;201(5):1136-40. doi: 10.2214/AJR.12.10405.

Abstract

OBJECTIVE

Angiographic C-arm CT may allow performing percutaneous stereotactic tumor ablations in the interventional radiology suite. Our purpose was to evaluate the accuracy of using C-arm CT for single and multimodality image fusions and to compare the targeting accuracy of liver lesions with the reference standard of MDCT.

MATERIALS AND METHODS

C-arm CT and MDCT scans were obtained of a nonrigid rapid prototyping liver phantom containing five 1-mm targets that were placed under skin-simulating deformable plastic foam. Target registration errors of image fusion were evaluated for single-modality and multimodality image fusions. A navigation system and stereotactic aiming device were used to evaluate target positioning errors on postinterventional scans with the needles in place fused with the C-arm CT or MDCT planning images.

RESULTS

Target registration error of the image fusion showed no significant difference (p > 0.05) between both modalities. In five series with a total of 25 punctures for each modality, the lateral target positioning error (i.e., the lateral distance between the needle tip and the planned trajectory) was similar for C-arm CT (mean [± SD], 1.6 ± 0.6 mm) and MDCT (1.82 ± .97 mm) (p = 0.33).

CONCLUSION

In a nonrigid liver phantom, angiographic C-arm CT may provide similar image fusion accuracy for comparison of intra- and postprocedure control images with the planning images and enables stereotactic targeting accuracy similar to that of MDCT.

摘要

目的

血管造影 C 型臂 CT 可使经皮立体定向肿瘤消融术在介入放射学手术室中进行。我们的目的是评估 C 型臂 CT 用于单模态和多模态图像融合的准确性,并比较肝脏病变的靶向准确性与 MDCT 的参考标准。

材料与方法

对含有 5 个 1mm 靶标的非刚性快速成型肝脏体模进行 C 型臂 CT 和 MDCT 扫描,靶标位于皮肤模拟可变形泡沫塑料下。评估单模态和多模态图像融合的图像融合靶标注册误差。使用导航系统和立体定向瞄准装置,在放置的针与 C 型臂 CT 或 MDCT 规划图像融合的情况下,评估介入后扫描的靶标定位误差。

结果

两种模式的图像融合靶标注册误差无显著差异(p>0.05)。在总共 5 个系列的 25 次穿刺中,C 型臂 CT(平均[±SD],1.6±0.6mm)和 MDCT(1.82±0.97mm)的侧方靶标定位误差(即针尖与规划轨迹之间的侧方距离)相似(p=0.33)。

结论

在非刚性肝脏体模中,血管造影 C 型臂 CT 可为术中与术后控制图像与规划图像的比较提供相似的图像融合准确性,并实现与 MDCT 相似的立体定向靶向准确性。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验