Feng Yan, Yang Ai-Mei, Liu Jun-Xi, Di Duo-Long, Liu Yan-Juan, Li Min
College of Life Science & Engineering, Lanzhou University of Technology, Lanzhou 730050, China.
Zhong Yao Cai. 2013 May;36(5):807-9.
To optimize the conditions of extraction and purification of isocorydine from Dicranostigma leptopodum.
Extraction conditions of isocorydine were selected on the basis of orthogonal experimental design, the static adsorption/desorption experiments were used to evaluate the optimum resin.
The optimum extraction parameters were as follows: the ratio of raw materials to solvent 1:15 (g/mL), extraction solvent 1% vitriol, the extraction three times and 1 h each time. LX28 resin exhibited higher adsorption efficiency.
Under the above optimum conditions, the extraction yield of isocorydine is 0.88%. The purity of isocorydine can reach 85.34% with a yield rate of 68.64%.
优化从伏毛铁棒锤中提取和纯化异紫堇定的条件。
基于正交实验设计选择异紫堇定的提取条件,采用静态吸附/解吸实验评估最佳树脂。
最佳提取参数如下:原料与溶剂之比为1:15(g/mL),提取溶剂为1%硫酸,提取3次,每次1小时。LX28树脂表现出较高的吸附效率。
在上述最佳条件下,异紫堇定的提取率为0.88%。异紫堇定的纯度可达85.34%,得率为68.64%。