Effect of toothbrushing-mouthrinse-cycling on surface roughness and topography of nanofilled, microfilled, and microhybrid resin composites.

The purpose of this study was to evaluate the influence of toothbrushing-mouthrinse-cycling (TMC) on the surface roughness and topography of three resin composites with different filler particle systems (Z350, nanofilled [Nf]; Durafill, microfilled [Mf], and Empress Direct, microhybrid [Mh]). Twenty specimens of each resin composite (8.0 mm diameter and 2 mm height) were randomly divided into four groups (n=5) according to the mouthrinses: alcohol-free (Plax--P) and alcohol-containing (Listerine--L and Plax Fresh Mint--PM) and artificial saliva (control--AS). The specimens were submitted to TMC for nine weeks. A surface roughness tester and a three-dimensional profilometer were used to measure the roughness (Ra) and the topography (Sa) before and after TMC. The data were analyzed by multifactor analysis of variance and Tukey post hoc test (α=0.05). In all media, Mh presented greater roughness than Mf (p<0.05). The highest value of roughness was presented by Mh immersed in L (p<0.05). The lowest values of roughness were presented by Mf (p<0.05). The three resin composites presented the highest roughness after immersion in mouthrinses containing alcohol (PM and L) (p<0.05). For the three resin composites, the increase in roughness was noticeable after the fifth week. Topographic analysis showed that the smoothest surfaces were present after immersion in AS.