Shon Jeong Woo, Ohta Jitsuo, Ueno Kohei, Kobayashi Atsushi, Fujioka Hiroshi
Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan.
1] Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan [2] CREST, Japan Science and Technology Agency, Tokyo 102-0075, Japan.
Sci Rep. 2014 Jun 23;4:5325. doi: 10.1038/srep05325.
InGaN-based light-emitting diodes (LEDs) have been widely accepted as highly efficient light sources capable of replacing incandescent bulbs. However, applications of InGaN LEDs are limited to small devices because their fabrication process involves expensive epitaxial growth of InGaN by metalorganic vapor phase epitaxy on single-crystal wafers. If we can utilize a low-cost epitaxial growth process, such as sputtering on large-area substrates, we can fabricate large-area InGaN light-emitting displays. Here, we report the growth of GaN (0001) and InGaN (0001) films on amorphous SiO2 by pulsed sputtering deposition. We found that using multilayer graphene buffer layers allows the growth of highly c-axis-oriented GaN films even on amorphous substrates. We fabricated red, green, and blue InGaN LEDs and confirmed their successful operation. This successful fabrication of full-color InGaN LEDs on amorphous substrates by sputtering indicates that the technique is quite promising for future large-area light-emitting displays on amorphous substrates.
基于氮化铟镓(InGaN)的发光二极管(LED)已被广泛认可为能够取代白炽灯泡的高效光源。然而,InGaN发光二极管的应用仅限于小型器件,因为其制造工艺涉及通过金属有机气相外延在单晶晶片上进行昂贵的InGaN外延生长。如果我们能够利用低成本的外延生长工艺,例如在大面积衬底上进行溅射,就可以制造大面积的InGaN发光显示器。在此,我们报告了通过脉冲溅射沉积在非晶SiO2上生长GaN(0001)和InGaN(0001)薄膜的情况。我们发现,使用多层石墨烯缓冲层即使在非晶衬底上也能实现高度c轴取向的GaN薄膜生长。我们制造了红色、绿色和蓝色InGaN发光二极管,并证实了它们的成功运行。通过溅射在非晶衬底上成功制造全色InGaN发光二极管表明,该技术对于未来在非晶衬底上制造大面积发光显示器颇具前景。