Castagnola Elisa, Maiolo Luca, Maggiolini Emma, Minotti Antonio, Marrani Marco, Maita Francesco, Pecora Alessandro, Angotzi Gian Nicola, Ansaldo Alberto, Boffini Massimiliano, Fadiga Luciano, Fortunato Guglielmo, Ricci Davide
IEEE Trans Neural Syst Rehabil Eng. 2015 May;23(3):342-50. doi: 10.1109/TNSRE.2014.2342880. Epub 2014 Jul 25.
Electrocorticography (ECoG) is becoming a common tool for clinical applications, such as preparing patients for epilepsy surgery or localizing tumor boundaries, as it successfully balances invasiveness and information quality. Clinical ECoG arrays use millimeter-scale electrodes and centimeter-scale pitch and cannot precisely map neural activity. Higher-resolution electrodes are of interest for both current clinical applications, providing access to more precise neural activity localization and novel applications, such as neural prosthetics, where current information density and spatial resolution is insufficient to suitably decode signals for a chronic brain-machine interface. Developing such electrodes is not trivial because their small contact area increases the electrode impedance, which seriously affects the signal-to-noise ratio, and adhering such an electrode to the brain surface becomes critical. The most straightforward approach requires increasing the array conformability with flexible substrates while improving the electrode performance using materials with superior electrochemical properties. In this paper, we propose an ultra-flexible and conformable polyimide-based micro-ECoG array of submillimeter recording sites electrochemically coated with high surface area conductive polymer-carbon nanotube composites to improve their brain-electrical coupling capabilities. We characterized our devices both electrochemically and by recording from rat somatosensory cortex in vivo. The performance of the coated and uncoated electrodes was directly compared by simultaneously recording the same neuronal activity during multiwhisker deflection stimulation. Finally, we assessed the effect of electrode size on the extraction of somatosensory evoked potentials and found that in contrast to the normal high-impedance microelectrodes, the recording capabilities of our low-impedance microelectrodes improved upon reducing their size from 0.2 to 0.1 mm.
皮层脑电图(ECoG)正成为一种常见的临床应用工具,例如为癫痫手术患者做准备或确定肿瘤边界,因为它成功地平衡了侵入性和信息质量。临床ECoG阵列使用毫米级电极和厘米级间距,无法精确绘制神经活动图。更高分辨率的电极对于当前的临床应用都很有意义,它能实现更精确的神经活动定位,还适用于一些新的应用,如神经假体,目前的信息密度和空间分辨率不足以对慢性脑机接口的信号进行适当解码。开发这样的电极并非易事,因为其小接触面积会增加电极阻抗,严重影响信噪比,并且将这样的电极附着到脑表面变得至关重要。最直接的方法是在使用具有优异电化学性能的材料提高电极性能的同时,增加阵列与柔性基板的贴合度。在本文中,我们提出了一种基于聚酰亚胺的超柔性且贴合的微ECoG阵列,其亚毫米级记录位点经电化学涂覆有高表面积导电聚合物 - 碳纳米管复合材料,以提高其脑电耦合能力。我们通过电化学方法以及在大鼠体感皮层进行体内记录对我们的器件进行了表征。通过在多须偏转刺激期间同时记录相同的神经元活动,直接比较了涂覆和未涂覆电极的性能。最后,我们评估了电极尺寸对体感诱发电位提取的影响,发现与普通的高阻抗微电极不同,我们的低阻抗微电极在尺寸从0.2毫米减小到0.1毫米时,记录能力有所提高。