Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University , Houghton Michigan 49931, USA.
School of Mechanical Engineering, Chung-Ang University , 221 Heukseok-Dong, Dongjak-Gu, Seoul 156-756, South Korea.
Biomicrofluidics. 2014 Aug 11;8(4):044116. doi: 10.1063/1.4892894. eCollection 2014 Jul.
An electro-osmosis (EOS) diode pumping platform capable of culturing cells in fluidic cellular micro-environments particularly at low volume flow rates has been developed. Diode pumps have been shown to be a viable alternative to mechanically driven pumps. Typically electrokinetic micro-pumps were limited to low-concentration solutions (≤10 mM). In our approach, surface mount diodes were embedded along the sidewalls of a microchannel to rectify externally applied alternating current into pulsed direct current power across the diodes in order to generate EOS flows. This approach has for the first time generated flows at ultra-low flow rates (from 2.0 nl/s to 12.3 nl/s) in aqueous solutions with concentrations greater than 100 mM. The range of flow was generated by changing the electric field strength applied to the diodes from 0.5 Vpp/cm to 10 Vpp/cm. Embedding an additional diode on the upper surface of the enclosed microchannel increased flow rates further. We characterized the diode pump-driven fluidics in terms of intensities and frequencies of electric inputs, pH values of solutions, and solution types. As part of this study, we found that the growth of A549 human lung cancer cells was positively affected in the microfluidic diode pumping system. Though the chemical reaction compromised the fluidic control overtime, the system could be maintained fully functional over a long time if the solution was changed every hour. In conclusion, the advantage of miniature size and ability to accurately control fluids at ultra-low volume flow rates can make this diode pumping system attractive to lab-on-a-chip applications and biomedical engineering in vitro studies.
已经开发出一种能够在流体细胞微环境中培养细胞的电渗流(EOS)二极管泵送平台,尤其适用于低体积流速。已经证明二极管泵是机械驱动泵的可行替代品。通常,电动微泵仅限于低浓度溶液(≤10mM)。在我们的方法中,表面贴装二极管被嵌入微通道的侧壁中,以将外部施加的交流电整流为跨二极管的脉冲直流电,以产生 EOS 流。这种方法首次在浓度大于 100mM 的水溶液中产生超低流速(2.0nl/s 至 12.3nl/s)的流动。通过将施加到二极管的电场强度从 0.5Vpp/cm 改变到 10Vpp/cm,可以产生流动范围。在封闭微通道的上表面嵌入额外的二极管可以进一步提高流速。我们根据电输入的强度和频率、溶液的 pH 值和溶液类型来表征二极管泵驱动的流体。作为这项研究的一部分,我们发现 A549 人肺癌细胞的生长在微流道二极管泵送系统中受到积极影响。尽管化学反应会随着时间的推移而破坏流体控制,但如果每小时更换一次溶液,该系统可以长时间保持完全功能。总之,微型尺寸和在超低体积流速下精确控制流体的能力使得这种二极管泵送系统对芯片实验室应用和体外生物医学工程研究具有吸引力。