Liu Zhi-Hua, Qin Lei, Zhu Jia-Qing, Li Bing-Zhi, Yuan Ying-Jin
Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, 92 Weijin Road, Nankai District Tianjin, 300072 China ; SynBio Research Platform, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, 92 Weijin Road, Nankai District Tianjin, 300072 China.
Biotechnol Biofuels. 2014 Dec 4;7(1):167. doi: 10.1186/s13068-014-0167-x. eCollection 2014.
Simultaneous saccharification and fermentation (SSF) is a promising process for bioconversion of lignocellulosic biomass. High glucan loading for hydrolysis and fermentation is an efficient approach to reduce the capital costs for bio-based products production. The SSF of steam-exploded corn stover (SECS) for ethanol production at high glucan loading and high temperature was investigated in this study.
Glucan conversion of corn stover biomass pretreated by steam explosion was maintained at approximately 71 to 79% at an enzyme loading of 30 filter paper units (FPU)/g glucan, and 74 to 82% at an enzyme loading of 60 FPU/g glucan, with glucan loading varying from 3 to 12%. Glucan conversion decreased obviously with glucan loading beyond 15%. The results indicated that the mixture was most efficient in enzymatic hydrolysis of SECS at 3 to 12% glucan loading. The optimal SSF conditions of SECS using a novel Saccharomyces cerevisiae were inoculation optical density (OD)600 = 4.0, initial pH 4.8, 50% nutrients added, 36 hours pre-hydrolysis time, 39°C, and 12% glucan loading (20% solid loading). With the addition of 2% Tween 20, glucan conversion, ethanol yield, final ethanol concentration reached 78.6%, 77.2%, and 59.8 g/L, respectively, under the optimal conditions. The results suggested that the solid and degradation products' inhibitory effect on the hydrolysis and fermentation of SECS were also not obvious at high glucan loading. Additionally, glucan conversion and final ethanol concentration in SSF of SECS increased by 13.6% and 18.7%, respectively, compared with separate hydrolysis and fermentation (SHF).
Our research suggested that high glucan loading (6 to 12% glucan loading) and high temperature (39°C) significantly improved the SSF performance of SECS using a thermal- and ethanol-tolerant strain of S. cerevisiae due to the removal of degradation products, sugar feedback, and solid's inhibitory effects. Furthermore, the surfactant addition obviously increased ethanol yield in SSF process of SECS.
同步糖化发酵(SSF)是木质纤维素生物质生物转化的一种有前景的工艺。高葡聚糖负载量用于水解和发酵是降低生物基产品生产成本的有效方法。本研究对高温下高葡聚糖负载量的蒸汽爆破玉米秸秆(SECS)同步糖化发酵生产乙醇进行了研究。
蒸汽爆破预处理的玉米秸秆生物质在葡聚糖负载量为3%至12%时,酶负载量为30滤纸酶活单位(FPU)/克葡聚糖时,葡聚糖转化率维持在约71%至79%,酶负载量为60 FPU/克葡聚糖时,葡聚糖转化率维持在74%至82%。当葡聚糖负载量超过15%时,葡聚糖转化率明显下降。结果表明,在葡聚糖负载量为3%至12%时,该混合物对SECS的酶水解效率最高。使用新型酿酒酵母对SECS进行同步糖化发酵的最佳条件为接种光密度(OD)600 = 4.0、初始pH 4.8、添加50%的营养物质、36小时预水解时间、39°C以及12%的葡聚糖负载量(20%的固体负载量)。在最佳条件下,添加2%吐温20后,葡聚糖转化率、乙醇产率和最终乙醇浓度分别达到78.6%、77.2%和59.8克/升。结果表明,在高葡聚糖负载量下,固体及降解产物对SECS水解和发酵的抑制作用也不明显。此外,与单独水解发酵(SHF)相比,SECS同步糖化发酵中的葡聚糖转化率和最终乙醇浓度分别提高了13.6%和18.7%。
我们的研究表明,由于降解产物的去除、糖反馈和固体的抑制作用,高葡聚糖负载量(6%至12%的葡聚糖负载量)和高温(39°C)显著提高了使用耐热和耐乙醇的酿酒酵母菌株对SECS的同步糖化发酵性能。此外,添加表面活性剂明显提高了SECS同步糖化发酵过程中的乙醇产率。