May Rhea M, Magin Chelsea M, Mann Ethan E, Drinker Michael C, Fraser John C, Siedlecki Christopher A, Brennan Anthony B, Reddy Shravanthi T
Sharklet Technologies, Inc, 12635 E. Montview Blvd. Suite 155, Aurora, CO 80045, CO USA.
Departments of Bioengineering and Surgery, Pennsylvania State University, Hershey, PA USA.
Clin Transl Med. 2015 Feb 26;4:9. doi: 10.1186/s40169-015-0050-9. eCollection 2015.
Catheter-related bloodstream infections (CRBSIs) and catheter-related thrombosis (CRT) are common complications of central venous catheters (CVC), which are used to monitor patient health and deliver medications. CVCs are subject to protein adsorption and platelet adhesion as well as colonization by the natural skin flora (i.e. Staphylococcus aureus and Staphylococcus epidermidis). Antimicrobial and antithrombotic drugs can prevent infections and thrombosis-related complications, but have associated resistance and safety risks. Surface topographies have shown promise in limiting platelet and bacterial adhesion, so it was hypothesized that an engineered Sharklet micropattern, inspired by shark-skin, may provide a combined approach as it has wide reaching anti-fouling capabilities. To assess the feasibility for this micropattern to improve CVC-related healthcare outcomes, bacterial colonization and platelet interactions were analyzed in vitro on a material common for vascular access devices.
To evaluate bacterial inhibition after simulated vascular exposure, micropatterned thermoplastic polyurethane surfaces were preconditioned with blood proteins in vitro then subjected to a bacterial challenge for 1 and 18 h. Platelet adhesion was assessed with fluorescent microscopy after incubation of the surfaces with platelet-rich plasma (PRP) supplemented with calcium. Platelet activation was further assessed by monitoring fibrin formation with fluorescent microscopy after exposure of the surfaces to platelet-rich plasma (PRP) supplemented with calcium in a flow-cell. Results are reported as percent reductions and significance is based on t-tests and ANOVA models of log reductions. All experiments were replicated at least three times.
Blood and serum conditioned micropatterned surfaces reduced 18 h S. aureus and S. epidermidis colonization by 70% (p ≤ 0.05) and 71% (p < 0.01), respectively, when compared to preconditioned unpatterned controls. Additionally, platelet adhesion and fibrin sheath formation were reduced by 86% and 80% (p < 0.05), respectively, on the micropattern, when compared to controls.
The Sharklet micropattern, in a CVC-relevant thermoplastic polyurethane, significantly reduced bacterial colonization and relevant platelet interactions after simulated vascular exposure. These results suggest that the incorporation of the Sharklet micropattern on the surface of a CVC may inhibit the initial events that lead to CRBSI and CRT.
导管相关血流感染(CRBSIs)和导管相关血栓形成(CRT)是中心静脉导管(CVC)常见的并发症,CVC用于监测患者健康状况和给药。CVC会受到蛋白质吸附、血小板黏附以及天然皮肤菌群(即金黄色葡萄球菌和表皮葡萄球菌)的定植。抗菌和抗血栓药物可以预防感染和血栓形成相关并发症,但存在耐药性和安全风险。表面形貌在限制血小板和细菌黏附方面已显示出前景,因此有人推测,受鲨鱼皮启发设计的鲨纹微图案可能提供一种综合方法,因为它具有广泛的防污能力。为评估这种微图案改善CVC相关医疗结果的可行性,在一种常用于血管通路装置的材料上体外分析细菌定植和血小板相互作用。
为评估模拟血管暴露后的细菌抑制情况,体外将微图案化的热塑性聚氨酯表面用血液蛋白预处理,然后进行1小时和18小时的细菌攻击。在用补充钙的富血小板血浆(PRP)孵育表面后,通过荧光显微镜评估血小板黏附情况。在流动池中,将表面暴露于补充钙的富血小板血浆(PRP)后,通过荧光显微镜监测纤维蛋白形成,进一步评估血小板活化情况。结果以减少百分比报告,显著性基于对数减少的t检验和方差分析模型。所有实验至少重复三次。
与预处理的无图案对照相比,血液和血清预处理的微图案化表面在18小时时金黄色葡萄球菌和表皮葡萄球菌的定植分别减少了70%(p≤0.05)和71%(p<0.01)。此外,与对照相比,微图案上的血小板黏附和纤维蛋白鞘形成分别减少了86%和80%(p<0.05)。
在与CVC相关的热塑性聚氨酯中,鲨纹微图案在模拟血管暴露后显著减少了细菌定植和相关血小板相互作用。这些结果表明,在CVC表面引入鲨纹微图案可能抑制导致CRBSI和CRT的初始事件。