Lenge Matteo, Ramalli Alessandro, Tortoli Piero, Cachard Christian, Liebgott Hervé
IEEE Trans Ultrason Ferroelectr Freq Control. 2015 Dec;62(12):2126-37. doi: 10.1109/TUFFC.2015.007320.
Transverse oscillation (TO) methods introduce oscillations in the pulse-echo field (PEF) along the direction transverse to the ultrasound propagation direction. This may be exploited to extend flow investigations toward multidimensional estimates. In this paper, the TOs are coupled with the transmission of plane waves (PWs) to reconstruct high-framerate RF images with bidirectional oscillations in the pulse-echo field. Such RF images are then processed by a 2-D phase-based displacement estimator to produce 2-D vector flow maps at thousands of frames per second. First, the capability of generating TOs after PW transmissions was thoroughly investigated by varying the lateral wavelength, the burst length, and the transmission frequency. Over the entire region of interest, the generated lateral wavelengths, compared with the designed ones, presented bias and standard deviation of -3.3 ± 5.7% and 10.6 ± 7.4% in simulations and experiments, respectively. The performance of the ultrafast vector flow mapping method was also assessed by evaluating the differences between the estimated velocities and the expected ones. Both simulations and experiments show overall biases lower than 20% when varying the beam-to-flow angle, the peak velocity, and the depth of interest. In vivo applications of the method on the common carotid and the brachial arteries are also presented.
横向振荡(TO)方法在与超声传播方向垂直的方向上,在脉冲回波场(PEF)中引入振荡。这可用于将血流研究扩展到多维估计。在本文中,横向振荡与平面波(PW)传输相结合,以重建在脉冲回波场中具有双向振荡的高帧率射频图像。然后,通过基于二维相位的位移估计器对这些射频图像进行处理,以生成每秒数千帧的二维矢量流图。首先,通过改变横向波长、脉冲串长度和传输频率,深入研究了平面波传输后产生横向振荡的能力。在整个感兴趣区域内,与设计值相比,模拟和实验中产生的横向波长的偏差和标准差分别为-3.3±5.7%和10.6±7.4%。还通过评估估计速度与预期速度之间的差异,对超快矢量流映射方法的性能进行了评估。当改变波束与血流夹角、峰值速度和感兴趣深度时,模拟和实验均表明总体偏差低于20%。本文还介绍了该方法在颈总动脉和肱动脉上的体内应用。