Miao Qinghua, Wang Lidong, Liu Zhaoyuan, Wei Bing, Xu Fubiao, Fei Weidong
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
Sci Rep. 2016 Feb 24;6:21832. doi: 10.1038/srep21832.
N-doped graphene with Curie temperature higher than room temperature is a good candidate for nanomagnetic applications. Here we report a kind of N-doped graphene that exhibits ferromagnetic property with high Curie temperature (>600 K). Four graphene samples were prepared through self-propagating high-temperature synthesis (SHS), and the doped nitrogen contents of in the samples were 0 at.%, 2.53 at.%, 9.21 at.% and 11.17 at.%. It has been found that the saturation magnetization and coercive field increase with the increasing of nitrogen contents in the samples. For the sample with the highest nitrogen content, the saturation magnetizations reach 0.282 emu/g at 10 K and 0.148 emu/g at 300 K; the coercive forces reach 544.2 Oe at 10 K and 168.8 Oe at 300 K. The drop of magnetic susceptibility at ~625 K for N-doped graphene is mainly caused by the decomposition of pyrrolic N and pydinic N. Our results suggest that SHS method is an effective and high-throughput method to produce N-doped graphene with high nitrogen concentration and that N-doped graphene produced by SHS method is promising to be a good candidate for nanomagnetic applications.
居里温度高于室温的氮掺杂石墨烯是纳米磁应用的理想候选材料。在此,我们报道了一种具有高居里温度(>600 K)的铁磁特性的氮掺杂石墨烯。通过自蔓延高温合成法(SHS)制备了四个石墨烯样品,样品中的掺杂氮含量分别为0原子%、2.53原子%、9.21原子%和11.17原子%。研究发现,样品的饱和磁化强度和矫顽场随氮含量的增加而增大。对于氮含量最高的样品,在10 K时饱和磁化强度达到0.282 emu/g,在300 K时达到0.148 emu/g;矫顽力在10 K时达到544.2 Oe,在300 K时达到168.8 Oe。氮掺杂石墨烯在~625 K时磁化率的下降主要是由吡咯氮和吡啶氮的分解引起的。我们的结果表明,SHS法是一种有效且高通量的制备高氮浓度氮掺杂石墨烯的方法,并且通过SHS法制备的氮掺杂石墨烯有望成为纳米磁应用的理想候选材料。