Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign , Urbana, Illinois 61801, United States.
J Am Chem Soc. 2016 Aug 24;138(33):10444-51. doi: 10.1021/jacs.6b03834. Epub 2016 Aug 15.
Unexpected etching of nanocrystals, nanorods, and their heterostructures by one of the most commonly used metal precursors, metal oleates, is reported. Zn oleate is shown to etch CdS nanorods anisotropically, where the length decreases without a significant change in the diameter. Sodium oleate enhances the etch rate, whereas oleic acid alone does not cause etching, indicating the importance of the countercation on the rate of oleate induced etching. Subsequent addition of Se precursors to the partially etched nanorods in Zn oleate solution can lead to epitaxial growth of CdSe particles rather than the expected ZnSe growth, despite an excess amount of Zn precursors being present. The composition of this epitaxial growth can be varied from CdSe to ZnSe, depending on the amount of excess oleic acid or the reaction temperature. Similar tuning of composition can be observed when starting with collinear CdSe/CdS/CdSe rod/rod/rod heterostructures and spherical CdS (or CdSe/CdS core/shell) nanocrystals. Conversion of collinear rod/rod/rod structures to barbells and interesting rod growth from nearly spherical particles among other structures can also result due to the initial etching effect of metal oleates. These observations have important implications on our understanding of nanocrystal heterostructure synthesis and open up new routes to varying the composition and morphology of these materials.
本文报道了一种最常用的金属前体——金属油酸酯,会对纳米晶、纳米棒及其异质结构进行意想不到的刻蚀。实验表明 Zn 油酸酯会对 CdS 纳米棒进行各向异性刻蚀,其长度会减小,而直径没有明显变化。油酸钠会提高刻蚀速率,而单独的油酸则不会引起刻蚀,这表明反离子对油酸诱导刻蚀速率的重要性。随后,将硒前体添加到 Zn 油酸酯溶液中部分刻蚀的纳米棒中,可以导致 CdSe 颗粒的外延生长,而不是预期的 ZnSe 生长,尽管存在过量的 Zn 前体。这种外延生长的组成可以根据过量油酸的量或反应温度从 CdSe 到 ZnSe 变化。当从共线 CdSe/CdS/CdSe 棒/棒/棒异质结构和球形 CdS(或 CdSe/CdS 核/壳)纳米晶开始时,也可以观察到类似的组成调谐。由于金属油酸酯的初始刻蚀效应,还可以将共线棒/棒/棒结构转化为杠铃,并使近球形颗粒生长出有趣的棒状结构。这些观察结果对我们理解纳米晶异质结构合成具有重要意义,并为改变这些材料的组成和形态开辟了新途径。