Fachbereich Physik, Philipps-Universität Marburg , 35032 Marburg, Germany.
Abteilung Chemische Physik, Fritz-Haber-Institut der Max-Planck-Gesellschaft , 14195 Berlin, Germany.
ACS Appl Mater Interfaces. 2017 Mar 8;9(9):8384-8392. doi: 10.1021/acsami.6b15902. Epub 2017 Feb 27.
The novel organic semiconductor dinaphthothienothiophene (DNTT) has gained considerable interest because its large charge carrier mobility and distinct chemical robustness enable the fabrication of organic field effect transistors with remarkable long-term stability under ambient conditions. Structural aspects of DNTT films and their control, however, remain so far largely unexplored. Interestingly, the crystalline structure of DNTT is rather similar to that of the prototypical pentacene, for which the molecular orientation in crystalline thin films can be controlled by means of interface-mediated growth. Combining atomic force microscopy, near-edge X-ray absorption fine structure, photoelectron emission microscopy, and X-ray diffraction, we compare substrate-mediated control of molecular orientation, morphology, and wetting behavior of DNTT films on the prototypical substrates SiO and graphene as well as technologically relevant dielectric surfaces (SiO and metal oxides that were pretreated with self-assembled monolayers (SAMs)). We found an immediate three-dimensional growth on graphene substrates, while an interfacial wetting layer is formed on the other substrates. Rather surprisingly, we observe distinct temporal changes of DNTT thin films on SiO and the SAM-treated dielectric substrates, which exhibit a pronounced dewetting and island formation on time scales of minutes to hours, even under ambient conditions, leading to a breakup of the initially closed wetting layer. These findings are unexpected in view of the reported long-time stability of DNTT-based devices. Therefore, their future consideration is expected to enable the further improvement of such applications, especially since these structural modifications are equivalently observed also on the SAM-treated dielectric surfaces, which are commonly used in device processing.
新型有机半导体二萘并噻吩并噻吩(DNTT)因其具有较大的电荷载流子迁移率和明显的化学稳定性,能够在环境条件下制造出具有显著长期稳定性的有机场效应晶体管,因此受到了广泛关注。然而,到目前为止,DNTT 薄膜的结构方面及其控制仍然在很大程度上未被探索。有趣的是,DNTT 的晶体结构与典型的并五苯非常相似,对于并五苯,通过界面介导的生长可以控制其在晶体薄膜中的分子取向。我们结合原子力显微镜、近边 X 射线吸收精细结构、光电子发射显微镜和 X 射线衍射,比较了 DNTT 薄膜在典型衬底 SiO 和石墨烯以及技术相关介电表面(SiO 和用自组装单层(SAM)预处理的金属氧化物)上的分子取向、形态和润湿性的衬底介导控制。我们发现 DNTT 薄膜在石墨烯衬底上立即进行三维生长,而在其他衬底上形成界面润湿层。相当出人意料的是,我们观察到 DNTT 薄膜在 SiO 和 SAM 处理的介电衬底上的明显时间变化,即使在环境条件下,它们在几分钟到几小时的时间尺度上也会发生明显的去湿和岛形成,导致初始封闭润湿层的破裂。考虑到基于 DNTT 的器件的报告的长时间稳定性,这些发现是出乎意料的。因此,预计对其进行进一步考虑将能够改善这些应用,特别是因为在器件处理中通常使用的 SAM 处理介电表面上也观察到这些结构修饰。