National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, PR China.
University of Chinese Academy of Sciences, Beijing, 100049, PR China.
Sci Rep. 2017 Jun 28;7(1):4333. doi: 10.1038/s41598-017-04684-8.
Acetoin (3-hydroxy-2-butanone) is an important bio-based platform chemical with wide applications. In vitro enzyme catalysed synthesis exhibits great feasibility in the production of chemicals with high purity. In the present work, a synthetic pathway involving a two-step continuous reaction was constructed in vitro for acetoin production from pyruvate at improved temperature. Thermostable candidates, acetolactate synthase (coAHASL1 and coAHASL2 from Caldicellulosiruptor owensensis OL) and α-acetolactate decarboxylase (bsALDC from Bacillus subtilis IPE5-4) were cloned, heterologously expressed, and characterized. All the enzymes showed maximum activities at 65-70 °C and pH of 6.5. Enzyme kinetics analysis showed that coAHASL1 had a higher activity but lower affinity against pyruvate than that of coAHASL2. In addition, the activities of coAHASL1 and bsALDC were promoted by Mn and NADPH. The cascade enzymatic reaction was optimized by using coAHASL1 and bsALDC based on their kinetic properties. Under optimal conditions, a maximum concentration of 3.36 ± 0.26 mM acetoin was produced from 10 mM pyruvate after reaction for 24 h at 65 °C. The productivity of acetoin was 0.14 mM h, and the yield was 67.80% compared with the theoretical value. The results confirmed the feasibility of synthesis of acetoin from pyruvate with a cell-free enzyme catalysed system at improved temperature.
乙酰丙酮(3-羟基-2-丁酮)是一种重要的生物基平台化学品,具有广泛的应用。体外酶催化合成在生产高纯度化学品方面表现出很大的可行性。在本工作中,构建了一条涉及两步连续反应的体外合成途径,以提高温度从丙酮酸生产乙酰丙酮。耐热候选物,乙酰乳酸合酶(Caldicellulosiruptor owensensis OL 的 coAHASL1 和 coAHASL2)和α-乙酰乳酸脱羧酶(Bacillus subtilis IPE5-4 的 bsALDC)被克隆、异源表达和表征。所有酶在 65-70°C 和 pH 6.5 下表现出最大活性。酶动力学分析表明,coAHASL1 对丙酮酸的活性高于 coAHASL2,但亲和力较低。此外,coAHASL1 和 bsALDC 的活性受到 Mn 和 NADPH 的促进。根据 coAHASL1 和 bsALDC 的动力学特性,通过使用 coAHASL1 和 bsALDC 对级联酶反应进行了优化。在最佳条件下,在 65°C 下反应 24 小时后,从 10mM 丙酮酸中可产生 3.36±0.26mM 的乙酰丙酮,最大浓度为 3.36±0.26mM。乙酰丙酮的生产速率为 0.14mM·h,与理论值相比,产率为 67.80%。结果证实了在提高温度下使用无细胞酶催化体系从丙酮酸合成乙酰丙酮的可行性。