Elsayed Hamada, Rincón Romero Acacio, Ferroni Letizia, Gardin Chiara, Zavan Barbara, Bernardo Enrico
Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 Padova, Italy.
Ceramics Department, National Research Centre, El-Bohous Street, Cairo 12622, Egypt.
Materials (Basel). 2017 Feb 13;10(2):171. doi: 10.3390/ma10020171.
Highly porous wollastonite-diopside glass-ceramics have been successfully obtained by a new gel-casting technique. The gelation of an aqueous slurry of glass powders was not achieved according to the polymerization of an organic monomer, but as the result of alkali activation. The alkali activation of a Ca-Mg silicate glass (with a composition close to 50 mol % wollastonite-50 mol % diopside, with minor amounts of Na₂O and P₂O₅) allowed for the obtainment of well-dispersed concentrated suspensions, undergoing progressive hardening by curing at low temperature (40 °C), owing to the formation of a C-S-H (calcium silicate hydrate) gel. An extensive direct foaming was achieved by vigorous mechanical stirring of partially gelified suspensions, comprising also a surfactant. The open-celled structure resulting from mechanical foaming could be 'frozen' by the subsequent sintering treatment, at 900-1000 °C, causing substantial crystallization. A total porosity exceeding 80%, comprising both well-interconnected macro-pores and micro-pores on cell walls, was accompanied by an excellent compressive strength, even above 5 MPa.
通过一种新的凝胶铸造技术已成功制备出高度多孔的硅灰石 - 透辉石微晶玻璃。玻璃粉末水浆料的凝胶化并非通过有机单体的聚合实现,而是碱活化的结果。对一种Ca - Mg硅酸盐玻璃(其成分接近50摩尔%硅灰石 - 50摩尔%透辉石,含有少量Na₂O和P₂O₅)进行碱活化,可得到分散良好的浓缩悬浮液,由于形成了C - S - H(硅酸钙水合物)凝胶,该悬浮液在低温(40°C)固化时会逐渐硬化。通过对部分凝胶化的悬浮液进行剧烈机械搅拌(其中还包含一种表面活性剂)实现了广泛的直接发泡。机械发泡产生的开孔结构可通过随后在900 - 1000°C的烧结处理“固定”下来,从而导致大量结晶。总孔隙率超过80%,包括相互连通良好的大孔和孔壁上的微孔,同时具有优异的抗压强度,甚至超过5 MPa。