Paulsson Johnny, Stig Josefine Corin, Olsson Ola
Department of Orthopedics, Helsingborg Hospital, S-251 87, Helsingborg, Sweden.
BMC Musculoskelet Disord. 2017 Aug 24;18(1):364. doi: 10.1186/s12891-017-1723-x.
In treatment of unstable trochanteric fractures dynamic hip screw and Medoff sliding plate devices are designed to allow secondary fracture impaction, whereas intramedullary nails aim to maintain fracture alignment. Different treatment protocols are used by two similar Swedish regional emergency care hospitals. Dynamic hip screw is used for fractures considered as stable within the respective treatment protocol, whereas one treatment protocol (Medoff sliding plate/dynamic hip screw) uses biaxial Medoff sliding plate for unstable pertrochanteric fractures and uniaxial Medoff sliding plate for subtrochanteric fractures, the second (intramedullary nail/dynamic hip screw) uses intramedullary nail for subtrochanteric fractures and for pertrochanteric fractures with intertrochanteric comminution or subtrochanteric extension. All orthopedic surgeries are registered in a regional database.
All consecutive trochanteric fracture operations during 2011-2012 (n = 856) and subsequent technical reoperations (n = 40) were derived from the database. Reoperations were analysed and classified into the categories adjustment (percutaneous removal of the locking screw of the Medoff sliding plate or the intramedullary nail, followed by fracture healing) or minor, intermediate (reosteosynthesis) or major (hip joint replacement, Girdlestone or persistent nonunion) technical complications.
The relative risk of intermediate or major technical complications was 4.2 (1.2-14) times higher in unstable pertrochanteric fractures and 4.6 (1.1-19) times higher in subtrochanteric fractures with treatment protocol: intramedullary nail/dynamic hip screw, compared to treatment protocol: Medoff sliding plate/dynamic hip screw. Overall rates of intermediate and major technical complications in unstable pertrochanteric and subtrochanteric fractures were with biaxial Medoff sliding plate 0.68%, with uniaxial Medoff sliding plate 1.4%, with dynamic hip screw 3.4% and with intramedullary nail 7.2%.
The treatment protocol based on use of biaxial Medoff sliding plate for unstable pertrochanteric and uniaxial Medoff sliding plate for subtrochanteric fractures reduced the risk of severe technical complications compared to using the treatment protocol based on dynamic hip screw and intramedullary nail.
在不稳定型转子间骨折的治疗中,动力髋螺钉和梅多夫滑动钢板装置旨在实现二次骨折嵌插,而髓内钉则旨在维持骨折对线。瑞典两家类似的地区急诊医院采用了不同的治疗方案。在各自的治疗方案中,动力髋螺钉用于被认为稳定的骨折,而一种治疗方案(梅多夫滑动钢板/动力髋螺钉)对不稳定的转子周围骨折使用双轴梅多夫滑动钢板,对转子下骨折使用单轴梅多夫滑动钢板;另一种治疗方案(髓内钉/动力髋螺钉)对转子下骨折以及伴有转子间粉碎或转子下延伸的转子周围骨折使用髓内钉。所有骨科手术均记录在一个地区数据库中。
2011年至2012年期间所有连续的转子间骨折手术(n = 856)及随后的技术翻修手术(n = 40)均来自该数据库。对翻修手术进行分析,并分类为调整(经皮取出梅多夫滑动钢板或髓内钉的锁定螺钉,随后骨折愈合)或轻微、中度(重新骨固定)或严重(髋关节置换、吉尔德斯通手术或持续不愈合)技术并发症。
与治疗方案:梅多夫滑动钢板/动力髋螺钉相比,治疗方案:髓内钉/动力髋螺钉治疗不稳定转子周围骨折时发生中度或严重技术并发症的相对风险高4.2(1.2 - 14)倍,治疗转子下骨折时高4.6(1.1 - 19)倍。不稳定转子周围骨折和转子下骨折中度和严重技术并发症的总体发生率,双轴梅多夫滑动钢板为0.68%,单轴梅多夫滑动钢板为1.4%,动力髋螺钉为3.4%,髓内钉为7.2%。
与基于动力髋螺钉和髓内钉的治疗方案相比,对不稳定转子周围骨折使用双轴梅多夫滑动钢板、对转子下骨折使用单轴梅多夫滑动钢板的治疗方案降低了严重技术并发症的风险。