Graduate School of Informatics and Engineering , The University of Electro-Communications , 1-5-1 Chofugaoka , Chofu , Tokyo 182-8585 , Japan.
China Scholarship Council, Level 13, Building A3, No.9 Chegongzhuang Avenue , Beijing 100044 , China.
ACS Appl Mater Interfaces. 2018 Aug 8;10(31):26142-26152. doi: 10.1021/acsami.7b06552. Epub 2017 Sep 22.
Using spatial energy-level gradient engineering with quantum dots (QDs) of different sizes to increase the generated carrier collection at the junction of a QD heterojunction solar cell (QDHSC) is a hopeful route for improving the energy-conversion efficiency. However, the results of current related research have shown that a variable band-gap structure in a QDHSC will create an appreciable increase, not in the illumination current density, but rather in the fill factor. In addition, there are a lack of studies on the mechanism of the effect of these graded structures on the photovoltaic performance of QDHSCs. This study presents the development of air atmosphere solution-processed TiO/PbS QDs/Au QDHSCs by engineering the energy-level alignment (ELA) of the active layer via the use of a sorted order of differently sized QD layers (four QD sizes). In comparison to the ungraded device (without the ELA), the optimized graded architecture (containing the ELA) solar cells exhibited a great increase (21.4%) in short-circuit current density ( J). As a result, a J value greater than 30 mA/cm has been realized in planar, thinner absorption layer (∼300 nm) PbS QDHSCs, and the open-circuit voltage ( V) and power-conversion efficiency (PCE) were also improved. Through characterization by the light intensity dependences of the J and V and transient photovoltage decay, we find that (i) the ELA structure, serving as an electron-blocking layer, reduces the interfacial recombination at the PbS/anode interface, and (ii) the ELA structure can drive more carriers toward the desirable collection electrode, and the additional carriers can fill the trap states, reducing the trap-assisted recombination in the PbS QDHSCs. This work has clearly elucidated the mechanism of the recombination suppression in the graded QDHSCs and demonstrated the effects of ELA structure on the improvement of J. The charge recombination mechanisms characterized in this work would be able to shed light on further improvements of QDHSCs, which could even benefit other types of solar cells.
利用具有不同尺寸的量子点(QD)的空间能级梯度工程来增加 QD 异质结太阳能电池(QD-HSC)结处产生的载流子收集,是提高能量转换效率的有希望的途径。然而,目前相关研究的结果表明,QD-HSC 中的可变能带隙结构不会显著提高光电流密度,而是会提高填充因子。此外,目前还缺乏研究这些渐变结构对 QD-HSC 光伏性能影响的机制。本研究通过使用不同尺寸的 QD 层(四个 QD 尺寸)的有序排列来工程化活性层的能级对准(ELA),开发了在空气气氛中溶液处理的 TiO/PbS QD/Au QDHSC。与非渐变器件(无 ELA)相比,优化的渐变结构(包含 ELA)太阳能电池的短路电流密度(J)大幅增加(21.4%)。因此,在平面、更薄的吸收层(约 300nm)PbS QDHSC 中实现了超过 30mA/cm 的 J 值,同时开路电压(V)和功率转换效率(PCE)也得到了提高。通过光强依赖的 J 和 V 特性以及瞬态光电压衰减的表征,我们发现:(i)ELA 结构作为电子阻挡层,减少了 PbS/阳极界面的界面复合;(ii)ELA 结构可以驱动更多的载流子流向理想的收集电极,并且额外的载流子可以填充陷阱态,减少 PbS QDHSC 中的陷阱辅助复合。这项工作清楚地阐明了渐变 QDHSC 中复合抑制的机制,并证明了 ELA 结构对 J 提高的影响。本工作中所表征的电荷复合机制将有助于进一步提高 QDHSC 的性能,甚至可以使其他类型的太阳能电池受益。