Department of Electronic Engineering, Sogang University, Seoul, Republic of Korea.
Phys Med Biol. 2018 Feb 9;63(4):045004. doi: 10.1088/1361-6560/aaa7a2.
Ultrafast compound Doppler imaging based on plane-wave excitation (UCDI) can be used to evaluate cardiovascular diseases using high frame rates. In particular, it provides a fully quantifiable flow analysis over a large region of interest with high spatio-temporal resolution. However, the pulse-repetition frequency (PRF) in the UCDI method is limited for high-velocity flow imaging since it has a tradeoff between the number of plane-wave angles (N) and acquisition time. In this paper, we present high PRF ultrafast sliding compound Doppler imaging method (HUSDI) to improve quantitative flow analysis. With the HUSDI method, full scanline images (i.e. each tilted plane wave data) in a Doppler frame buffer are consecutively summed using a sliding window to create high-quality ensemble data so that there is no reduction in frame rate and flow sensitivity. In addition, by updating a new compounding set with a certain time difference (i.e. sliding window step size or L), the HUSDI method allows various Doppler PRFs with the same acquisition data to enable a fully qualitative, retrospective flow assessment. To evaluate the performance of the proposed HUSDI method, simulation, in vitro and in vivo studies were conducted under diverse flow circumstances. In the simulation and in vitro studies, the HUSDI method showed improved hemodynamic representations without reducing either temporal resolution or sensitivity compared to the UCDI method. For the quantitative analysis, the root mean squared velocity error (RMSVE) was measured using 9 angles (-12° to 12°) with L of 1-9, and the results were found to be comparable to those of the UCDI method (L = N = 9), i.e. ⩽0.24 cm s, for all L values. For the in vivo study, the flow data acquired from a full cardiac cycle of the femoral vessels of a healthy volunteer were analyzed using a PW spectrogram, and arterial and venous flows were successfully assessed with high Doppler PRF (e.g. 5 kHz at L = 4). These results indicate that the proposed HUSDI method can improve flow visualization and quantification with a higher frame rate, PRF and flow sensitivity in cardiovascular imaging.
基于平面波激励的超快复合多普勒成像 (UCDI) 可用于使用高帧率评估心血管疾病。特别是,它在大感兴趣区域内提供完全可量化的流动分析,具有高时空分辨率。然而,由于在平面波角度数 (N) 和采集时间之间存在权衡,UCDI 方法中的脉冲重复频率 (PRF) 限制了高速血流成像。在本文中,我们提出了高 PRF 超快滑动复合多普勒成像方法 (HUSDI) 以改善定量流动分析。使用 HUSDI 方法,可以使用滑动窗口连续累加多普勒帧缓冲区中的全扫描线图像(即每个倾斜平面波数据),以创建高质量的集合数据,从而不会降低帧率和流量敏感度。此外,通过使用一定的时间差(即滑动窗口步长或 L)更新新的复合集,HUSDI 方法允许使用相同采集数据获得各种多普勒 PRF,从而能够进行全面定性、回顾性的流量评估。为了评估所提出的 HUSDI 方法的性能,在各种流动情况下进行了模拟、体外和体内研究。在模拟和体外研究中,与 UCDI 方法相比,HUSDI 方法在不降低时间分辨率或敏感度的情况下,改善了血液动力学表示。对于定量分析,使用 L 为 1-9 的 9 个角度(-12°至 12°)测量均方根速度误差(RMSVE),结果与 UCDI 方法(L = N = 9)相当,即所有 L 值的 RMSVE 都 ⩽0.24 cm s。对于体内研究,使用 PW 频谱图分析了健康志愿者股血管的整个心动周期采集的流量数据,并成功评估了动脉和静脉血流,具有较高的多普勒 PRF(例如 L = 4 时为 5 kHz)。这些结果表明,所提出的 HUSDI 方法可以在心血管成像中提高帧率、PRF 和流量灵敏度,从而改善流动可视化和量化。