Suppr超能文献

pH 触发的抗菌肽/油酸自组装体中的纳米结构转变。

pH-Triggered nanostructural transformations in antimicrobial peptide/oleic acid self-assemblies.

机构信息

Laboratory for Biointerfaces, Department Materials meet Life, Empa Swiss Federal Laboratories for Materials Science and Technology, Lerchenfeldstrasse 5, 9014, St Gallen, Switzerland.

出版信息

Biomater Sci. 2018 Mar 26;6(4):803-812. doi: 10.1039/c7bm00929a.

Abstract

The delivery of poorly water-soluble antimicrobial peptides (AMPs) that are sensitive to degradation is a major challenge in the pharmaceutical field. In this study, we design and characterize a pH-sensitive nanocarrier with the potential for delivery of AMPs and their protection from degradation. These nanobiointerfaces are prepared through the self-assembly of oleic acid (OA) with the human cathelicidin LL-37 in excess water. Advanced experimental methods including synchrotron small angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering were used to characterize the OA/LL-37 self-assemblies and their structural alterations in response to changes in pH and composition. Experimental findings reveal colloidal transformations from normal emulsions via micellar cubosomes and hexosomes to vesicles upon increasing the pH from 6.0 to 8.0 at a LL-37 content around 10 wt% relative to OA. Increasing the LL-37 content to 30 wt% in OA led to diminishing of micellar cubosomes and hexosomes in this narrow pH range, favoring the formation of micelles and vesicles of various shapes and sizes. Upon increasing the pH, with the strongest effect around pH 7.5, charge repulsions among the gradually deprotonating carboxylic groups of OA modified the geometric packing of the molecules, significantly affecting the nanostructure. These detailed insights into the formation of this unique family of nanobiointerfaces and their tunable structural features may contribute to the rational design of pH-responsive antimicrobial systems for the delivery of peptides, particularly poorly water-soluble AMPs.

摘要

将水溶性差的抗菌肽(AMPs)递送到体内是药物领域的一个重大挑战。在这项研究中,我们设计并表征了一种 pH 敏感的纳米载体,用于 AMPs 的递药并防止其降解。这些纳米生物界面是通过油酸(OA)与人体抗菌肽 LL-37 在过量水中自组装制备的。采用同步辐射小角 X 射线散射、低温透射电子显微镜和动态光散射等先进实验方法,对 OA/LL-37 自组装体及其结构在 pH 和组成变化下的变化进行了表征。实验结果表明,在 pH 从 6.0 增加到 8.0 的过程中,当 LL-37 相对于 OA 的含量约为 10wt%时,胶束囊泡和六方囊泡从正常乳液经历胶体转变。当 OA 中的 LL-37 含量增加到 30wt%时,在这个狭窄的 pH 范围内,胶束囊泡和六方囊泡减少,有利于形成各种形状和大小的胶束和囊泡。随着 pH 的增加,在 pH 7.5 左右的最强影响下,OA 中逐渐去质子化的羧酸基团之间的电荷排斥作用改变了分子的几何堆积,显著影响了纳米结构。对这种独特的纳米生物界面家族的形成及其可调结构特征的深入了解可能有助于合理设计 pH 响应型抗菌系统以递药,特别是水溶性差的 AMPs。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验