Chen Liangliang, Xu Xiaolong, Cui Feng, Qiu Qianying, Chen Xiaojun, Xu Jinzhong
College of Chemistry and Molecular Engineering, Nanjing Tech University, Nanjing 211816, PR China.
College of Chemistry and Molecular Engineering, Nanjing Tech University, Nanjing 211816, PR China; Jiangsu Sinography Testing Co. Ltd., Nanjing 210032, PR China.
Anal Biochem. 2018 Aug 1;554:1-8. doi: 10.1016/j.ab.2018.05.020. Epub 2018 May 23.
A novel electrochemical sensor based on the composite of gold nanoparticles/zinc oxide nanotube (AuNPs/ZnO-NTs) was constructed and its application as hydrogen peroxide (HO) non-enzymatic sensor was investigated. ZnO-NTs were prepared by a biomineralization strategy in which silk fibroin fiber (SFF) was used as template, and thus the ZnO-NTs inherited the advantages of SFF such as mechanical stability, flexible biomimetic morphology and biocompatibility. The AuNPs/ZnO-NTs was further prepared by the electrostatic absorption of AuNPs onto the surface of ZnO-NTs, and found to be capable to catalyze the reduction of HO. The working potential was 0.05 V, which was far higher than those in literatures, indicating the strong anti-interference ability in the real application. The catalytic current was linearly proportional in the concentration range of 1 μM-3.0 mM with a sensitivity of 1336.7 μA mM cm. The detection limit was estimated to be 0.1 μM (S/N = 3). Such a high sensitivity was attributed to the electrocatalytic property of ZnO and high electron transfer ability of AuNPs/ZnO-NTs structure. Moreover, the final detection results of HO in real samples showed the acceptable accuracy compared with the traditional potassium permanganate titration, exhibiting the prospect to be used as an applicable sensor in actual detections.
构建了一种基于金纳米颗粒/氧化锌纳米管(AuNPs/ZnO-NTs)复合材料的新型电化学传感器,并研究了其作为过氧化氢(HO)非酶传感器的应用。ZnO-NTs通过生物矿化策略制备,其中丝素蛋白纤维(SFF)用作模板,因此ZnO-NTs继承了SFF的优点,如机械稳定性、灵活的仿生形态和生物相容性。通过AuNPs在ZnO-NTs表面的静电吸附进一步制备了AuNPs/ZnO-NTs,发现其能够催化HO的还原。工作电位为0.05 V,远高于文献中的电位,表明在实际应用中具有很强的抗干扰能力。催化电流在1 μM-3.0 mM的浓度范围内呈线性比例,灵敏度为1336.7 μA mM cm。检测限估计为0.1 μM(S/N = 3)。如此高的灵敏度归因于ZnO的电催化性能和AuNPs/ZnO-NTs结构的高电子转移能力。此外,实际样品中HO的最终检测结果与传统高锰酸钾滴定法相比具有可接受的准确度,展现了在实际检测中用作适用传感器的前景。