Department of Biomedical Engineering , Tufts University , Medford , Massachusetts 02155 , United States.
Nano Lett. 2018 Jul 11;18(7):4606-4610. doi: 10.1021/acs.nanolett.8b01908. Epub 2018 Jun 25.
Extracellular electron transfer (EET) from electrochemically active bacteria (EAB) plays a critical role in renewable bioelectricity harvesting through microbial fuel cells (MFC). Comprehensive interpretation and interrogation of EET mechanisms can provide valuable information to enhance MFC performance, which however are still restricted by the intrinsic complexity of natural biofilm. Here, we design core/shell EAB-encapsulating cables as a one-dimensional model system to facilitate EET studies, where the local microenvironments can be rationally controlled to establish structure-function correlations with full biological relevance. In particular, our proof-of-concept studies with Shewanella loihica PV-4 ( S. loihica) encapsulating cables demonstrate the precise modulation of fiber diameters (from 6.9 ± 1.1 to 25.1 ± 2.4 μm) and bacteria interactions, which are found to play important roles in programming the formation of different intercellular structures as revealed by in situ optical and ex situ electron microscopic studies. As-formed bacterial cables exhibit conductivity in the range of 2.5-16.2 mS·cm, which is highly dependent on the bacteria density as well as the nature and number of intercellular interconnections. Under electron-acceptor limited conditions, the closely contacted bacteria promote the development of high density self-assembling nanomaterials at cellular interfaces which can be directly translated to the increase of EET efficiency (16.2 mS·cm) as compared with isolated, remotely connected bacteria samples (6.4 mS·cm). Introducing exceeding concentrations of soluble electron acceptors during cell culture, however, substantially suppresses the formation of cellular interconnections and leads to significantly reduced conductivity (2.5 mS·cm). Frequency-dependent measurements further reveal that EET of EAB networks share similar characteristics to electron hopping in conductive polymer matrix, including dominant direct current-conduction in the low frequency region, and alternating current-induced additional electron hopping when the applied frequency is above the critical frequency (10 Hz). The current work represents a strategically new approach for noninvasively probing EET with rationally defined microenvironment and cellular interactions across a wide range of length scales, which is expected to open up new opportunities for tackling the fundamentals and implications of EET.
电化学活性细菌(EAB)的胞外电子传递(EET)在通过微生物燃料电池(MFC)可再生生物电能的收获中起着关键作用。对 EET 机制的全面解释和探究可以提供有价值的信息,以增强 MFC 的性能,但这仍然受到天然生物膜内在复杂性的限制。在这里,我们设计了核/壳型 EAB 封装电缆作为一维模型系统,以促进 EET 研究,其中局部微环境可以得到合理控制,以建立具有充分生物学相关性的结构-功能相关性。特别是,我们用 Shewanella loihica PV-4(S. loihica)封装电缆进行的概念验证研究表明,纤维直径(从 6.9 ± 1.1 到 25.1 ± 2.4 μm)和细菌相互作用可以精确调节,这在原位光学和离位电子显微镜研究中发现对编程不同细胞间结构的形成起着重要作用。形成的细菌电缆的电导率在 2.5-16.2 mS·cm 的范围内,这高度依赖于细菌密度以及细胞间连接的性质和数量。在电子受体受限时,紧密接触的细菌促进了高密自组装纳米材料在细胞界面上的发展,这可以直接转化为 EET 效率的提高(16.2 mS·cm),与孤立的、远程连接的细菌样品(6.4 mS·cm)相比。然而,在细胞培养过程中引入超过浓度的可溶性电子受体会大大抑制细胞间连接的形成,导致电导率显著降低(2.5 mS·cm)。频率相关测量进一步表明,EAB 网络的 EET 具有与导电聚合物基质中电子跳跃相似的特征,包括在低频区的主要直流传导,以及当施加频率高于临界频率(10 Hz)时交流诱导的额外电子跳跃。这项工作代表了一种具有战略意义的新方法,可以在广泛的长度范围内对具有合理定义的微环境和细胞相互作用进行非侵入性的 EET 探测,这有望为解决 EET 的基本原理和影响开辟新的机会。