Chen Shu-Han, Li An-Jie, Wang Yue-Xing, Wu Ling-Juan
State Key Joint Laboratory of Environment Simulation and Pollution Control, Key Laboratory of Water and Sediment Sciences, Ministry of Education, School of Environment, Beijing Normal University, Beijing 100875, China.
Shenzhen Water Group Co., Ltd., Shenzhen 518001, China.
Huan Jing Ke Xue. 2017 Mar 8;38(3):1137-1143. doi: 10.13227/j.hjkx.201607027.
Anaerobic ammonium oxidation (ANAMMOX), an innovative nitrogen removal technology, has good prospects for applications. However, ANAMMOX bacteria grow slowly and are hardly accumulated in bioreactors. In this study, a UASB reactor inoculated with sludge from landfill leachate treatment plant was used for the start-up of ANAMMOX process. Besides, exogenous quorum sensing signals (DSF and AHL) were added to improve the adhesion of ANAMMOX sludge. The results showed that the UASB successfully started the ANAMMOX process within 150 days of operation. The total nitrogen removal rate reached 80% and the proportion of ANAMMOX bacteria rose to 20%. There was a low concentration of AHLs signal molecules in the ANAMMOX sludge. If the -position substituent group of AHL added was a carbonyl group (including 3-oxo-C-HSL, 3-oxo-C-HSL, 3-oxo-C-HSL and 3-oxo-C-HSL), the adhesion growth ability of the ANAMMOX sludge could be improved. In the case of dosing with AHL molecules without -position substituent groups, only C-HSL and C-HSL could promote the adhesion of ANAMMOX sludge. The additions of C-HSL, C-HSL and DSF all had negative effects on the adhesion of ANAMMOX sludge.
厌氧氨氧化(ANAMMOX)作为一种创新的脱氮技术,具有良好的应用前景。然而,厌氧氨氧化细菌生长缓慢,在生物反应器中难以富集。本研究采用接种垃圾渗滤液处理厂污泥的UASB反应器启动厌氧氨氧化工艺。此外,添加外源群体感应信号(DSF和AHL)以提高厌氧氨氧化污泥的附着力。结果表明,UASB在运行150天内成功启动了厌氧氨氧化工艺。总氮去除率达到80%,厌氧氨氧化细菌的比例升至20%。厌氧氨氧化污泥中AHLs信号分子浓度较低。若添加的AHL的ω位取代基为羰基(包括3-氧代-C-HSL、3-氧代-C-HSL、3-氧代-C-HSL和3-氧代-C-HSL),则可提高厌氧氨氧化污泥的附着生长能力。在添加无ω位取代基的AHL分子的情况下,只有C-HSL和C-HSL能促进厌氧氨氧化污泥的附着。添加C-HSL、C-HSL和DSF均对厌氧氨氧化污泥的附着产生负面影响。