Wu Chien-Hung, Chang Kow-Ming, Chen Yi-Ming, Zhang Yu-Xin, Cheng Chia-Yao
Department of Electronics Engineering, Chung Hua University, Hsinchu, Taiwan, 30012, R.O.C.
Department of Electronics Engineering, National Chiao Tung University, Hsinchu, Taiwan, 30010, R.O.C.
J Nanosci Nanotechnol. 2019 Apr 1;19(4):2302-2305. doi: 10.1166/jnn.2019.15994.
Conventional thin film transistor suffered from high threshold voltage, poor subthreshold swing, and high operation voltage. These shortcomings make the traditional thin film transistor does not meet the needs with the high-performance, high-resolution, low temperature and energy conservation nowadays. Due to the good selectivity of energy transformation and rapid heating rate, microwave annealing is promising to replace conventional furnace annealing and applied in the investigation. LaAlO₃/ZrO₂ is employed as gate electrode and gate dielectric layer for a-IGZO TFTs, under the premise that performance of a-IGZO TFTs without decreasing. With adjusting the power/time of microwave annealing, the effect on electrical characteristics of a-IGZO TFTs is investigated.
传统薄膜晶体管存在阈值电压高、亚阈值摆幅差和工作电压高的问题。这些缺点使得传统薄膜晶体管无法满足当今高性能、高分辨率、低温和节能的需求。由于微波退火具有良好的能量转换选择性和快速的加热速率,有望取代传统的炉式退火并应用于该研究中。在不降低非晶铟镓锌氧化物(a-IGZO)薄膜晶体管性能的前提下,采用LaAlO₃/ZrO₂作为a-IGZO薄膜晶体管的栅电极和栅介质层。通过调整微波退火的功率/时间,研究其对a-IGZO薄膜晶体管电学特性的影响。