Wang Ping, Li Gang, Qin Wen, Shi Bin, Liu Fan-Jie, Wang Lei-Lei, Zhao Bo-Nian, Sun Tie-Feng, Lin Ling, Wang Dan-Dan
State Key Laboratory of Precision Measurement Technology and Instruments, Tianjin University, 300072, Tianjin, China.
Shandong Academy of Chinese Medicine, 250014, Jinan, China.
Orthopade. 2019 Mar;48(3):213-223. doi: 10.1007/s00132-018-03678-2.
Osteonecrosis of the femoral head (ONFH) is a common joint disease and a major cause of morbidity.
In this study Cervi cornus Colla (CCC) deproteinized bone scaffolds were designed and three dimensional (3D)-printed for the repair of ONFH in rats.
The CCC-deproteinized bone scaffolds were 3D-printed using polycaprolactone mixed with the CCC-deproteinized bone powder. The scaffolds were viewed under a scanning electron microscope and subjected to compression analysis. Osteoblasts were isolated from rats and coated onto the scaffolds. Cell proliferation assays were performed with the MTT (3‑[4,5-dimethylthiazole‑2]-2,5-diphenyltetrazolium bromide) kit from Promega. An ONFH was induced in rats and a CCC-deproteinized bone scaffold was implanted into the necrotic femoral head. General observations, X‑ray imaging, and pathological examination of the femoral head were performed to evaluate the treatment of ONFH in the rats.
The scaffolds were porous with a mean pore diameter of 315.70 ± 41.52 nm and a porosity of 72.86 ± 5.45% and exhibited favorable mechanical properties and degradation. In vitro assays showed that osteoblasts accumulated in the pores and adhered to the scaffolds. The CCC-deproteinized bone scaffolds enhanced the proliferation of osteoblasts. The in vivo experiments revealed that the general observation score of rats in the CCC-scaffold implanted group was significantly higher than that in the control group. The X‑ray images showed significant alleviation of ONFH in the CCC-deproteinized bone scaffold implanted rats. The femoral heads of rats in the treatment group showed less destruction or ossification of cartilage cells, few bone cement lines, very little necrosis or irregularities on the cartilage surface and only a small amount of inflammatory cell infiltration in the medullary cavity.
These results suggest that CCC-deproteinized bone scaffold implants facilitated the repair of ONFH in rats. This research provides a new therapeutic approach for the repair of early and mid-term ONFH.
股骨头坏死(ONFH)是一种常见的关节疾病,也是发病的主要原因。
本研究设计并三维(3D)打印了鹿骨胶原(CCC)脱蛋白骨支架,用于修复大鼠的ONFH。
将聚己内酯与CCC脱蛋白骨粉混合,3D打印CCC脱蛋白骨支架。在扫描电子显微镜下观察支架,并进行压缩分析。从大鼠中分离成骨细胞并接种到支架上。使用Promega公司的MTT(3-[4,5-二甲基噻唑-2]-2,5-二苯基四氮唑溴盐)试剂盒进行细胞增殖测定。诱导大鼠发生ONFH,并将CCC脱蛋白骨支架植入坏死的股骨头。对股骨头进行一般观察、X线成像和病理检查,以评估大鼠ONFH的治疗效果。
支架呈多孔状,平均孔径为315.70±41.52nm,孔隙率为72.86±5.45%,具有良好的力学性能和降解性能。体外实验表明,成骨细胞聚集在孔隙中并附着在支架上。CCC脱蛋白骨支架促进了成骨细胞的增殖。体内实验显示,植入CCC支架组大鼠的一般观察评分显著高于对照组。X线图像显示,植入CCC脱蛋白骨支架的大鼠ONFH明显减轻。治疗组大鼠的股骨头软骨细胞破坏或骨化较少,骨水泥线少,软骨表面坏死或不规则少,髓腔内仅有少量炎性细胞浸润。
这些结果表明,CCC脱蛋白骨支架植入有助于大鼠ONFH的修复。本研究为早期和中期ONFH的修复提供了一种新的治疗方法。