Fischell Department of Bioengineering, University of Maryland, 3121 A James Clark Hall, College Park, MD 20742, United States of America. Center for Engineering Complex Tissues, University of Maryland, 3121 A James Clark Hall, College Park, MD 20742, United States of America.
Biofabrication. 2019 Mar 28;11(2):025013. doi: 10.1088/1758-5090/ab078a.
Bone tissue engineers are facing a daunting challenge when attempting to fabricate bigger constructs intended for use in the treatment of large bone defects, which is the vascularization of the graft. Cell-based approaches and, in particular, the use of in vitro coculture of human umbilical vein endothelial cells (HUVECs) and human mesenchymal stem cells (hMSCs) has been one of the most explored options. We present in this paper an alternative method to mimic the spatial pattern of HUVECs and hMSCs found in native osteons based on the use of extrusion-based 3D bioprinting (3DP). We developed a 3DP biphasic osteon-like scaffold, containing two separate osteogenic and vasculogenic cell populations encapsulated in a fibrin bioink in order to improve neovascularization. To this end, we optimized the fibrin bioink to improve the resolution of printed strands and ensure a reproducible printing process; the influence of printing parameters on extruded strand diameter and cell survival was also investigated. The mechanical strength of the construct was improved by co-printing the fibrin bioink along a supporting PCL carrier scaffold. Compressive mechanical testing showed improved mechanical properties with an average compressive modulus of 131 ± 23 MPa, which falls in the range of cortical bone. HUVEC and hMSC laden fibrin hydrogels were printed in osteon-like patterns and cultured in vitro. A significant increase in gene expression of angiogenic markers was observed for the biomimetic scaffolds. Finally, biphasic scaffolds were implanted subcutaneously in rats. Histological analysis of explanted scaffolds showed a significant increase in the number of blood vessels per area in the 3D printed osteon-like scaffolds. The utilization of these scaffolds in constructing biomimetic osteons for bone regeneration demonstrated a promising capacity to improve neovascularization of the construct. These results indicates that proper cell orientation and scaffold design could play a critical role in neovascularization.
骨组织工程师在试图制造用于治疗大骨缺损的更大构建体时面临着艰巨的挑战,这就是移植物的血管化。基于细胞的方法,特别是体外共培养人脐静脉内皮细胞(HUVEC)和人间充质干细胞(hMSC)的使用,是最受探索的选择之一。我们在本文中提出了一种替代方法,基于挤出式 3D 生物打印(3DP)来模拟天然骨单位中发现的 HUVEC 和 hMSC 的空间模式。我们开发了一种 3DP 双相类骨单位样支架,包含两种分离的成骨细胞和血管生成细胞群体,封装在纤维蛋白生物墨水,以改善新生血管化。为此,我们优化了纤维蛋白生物墨水以提高打印丝的分辨率并确保可重复的打印过程;还研究了打印参数对挤出丝直径和细胞存活率的影响。通过沿着支撑性聚己内酯(PCL)载体支架共打印纤维蛋白生物墨水,提高了构建体的机械强度。压缩力学测试显示,具有 131±23 MPa 的平均压缩模量的改进机械性能,该模量落在皮质骨的范围内。在类骨单位样模式下打印负载有 HUVEC 和 hMSC 的纤维蛋白水凝胶,并在体外进行培养。生物仿生支架的血管生成标记物的基因表达显著增加。最后,将双相支架皮下植入大鼠体内。对植入的支架进行组织学分析显示,3D 打印类骨单位支架中每单位面积的血管数量显著增加。这些支架在构建仿生骨单位以促进骨再生中的应用显示出改善构建体新生血管化的有前途的能力。这些结果表明,适当的细胞定向和支架设计可以在新生血管化中发挥关键作用。