1 Department of Biomedical Engineering and Mechanics, Virginia Tech , Blacksburg, VA 24061 , USA.
2 Department of Biology, Temple University , Philadelphia, PA 19122 , USA.
J R Soc Interface. 2019 Mar 29;16(152):20190014. doi: 10.1098/rsif.2019.0014.
Jumping out of water is a phenomenon exhibited by a variety of aquatic and semi-aquatic animals. Yet, there is no common groundwork that clarifies the physical constraints required to jump out of water. In this study, we elucidate the physical conditions required for an animal to jump out of water. More than 100 jumps are analysed over five taxonomic groups. By balancing the power produced by animals with drag-induced dissipation, we expect that maximum jumping height, H, scales with body length, L, as H/ L ∼ L ∼ Fr, where the Froude number, Fr, is a ratio of inertia to gravity. To identify jumping regimes, simplified experiments are conducted by shooting axisymmetric bodies through the water surface. Here, we see a transition in which partial exits scale as H/ L ∼ Fr and complete exits scale as H/ L ∼ Fr. A bioinspired robotic flapping mechanism was designed to mimic the fast motion of impulsive jumping animals. When exiting water, the robot carries a large volume of fluid referred to as an entrained mass. A theoretical model is developed to predict the jumping height of various water-exiting bodies, which shows that the mass of the entrained fluid relative to the mass of the body limits the maximum jumping height. We conclude that the lack of entrained fluid allows animals to reach extraordinary heights compared to our water-exiting robots.
跳出水面是各种水生和半水生动物表现出的一种现象。然而,目前还没有一个通用的基础理论来阐明跳出水面所需的物理限制。在这项研究中,我们阐明了动物跳出水面所需的物理条件。我们分析了五个分类群的 100 多次跳跃。通过平衡动物产生的力量和阻力引起的耗散,我们预计最大跳跃高度 H 与体长 L 的关系为 H/L∼L∼Fr,其中 Fr 是惯性与重力的比值。为了确定跳跃区域,我们通过水面向下发射轴对称物体来进行简化实验。在这里,我们看到一个转变,其中部分出口的规模为 H/L∼Fr,而完全出口的规模为 H/L∼Fr。我们设计了一种受生物启发的扑翼机器人来模拟具有冲击跳跃能力的动物的快速运动。当从水中出来时,机器人携带大量被称为夹带质量的流体。我们开发了一个理论模型来预测各种出水物体的跳跃高度,该模型表明,夹带流体的质量相对于物体的质量限制了最大跳跃高度。我们的结论是,缺乏夹带流体使得动物能够达到比我们的出水机器人更高的非凡高度。