Univ. of Houston, United States.
The Univ. of Texas at Austin, United States.
J Biomed Opt. 2019 Mar;24(3):1-7. doi: 10.1117/1.JBO.24.3.036004.
Cataract is one of the most prevalent causes of blindness around the world. Understanding the mechanisms of cataract development and progression is important for clinical diagnosis and treatment. Cold cataract has proven to be a robust model for cataract formation that can be easily controlled in the laboratory. There is evidence that the biomechanical properties of the lens can be significantly changed by cataract. Therefore, early detection of cataract, as well as evaluation of therapies, could be guided by characterization of lenticular biomechanical properties. In this work, we utilized optical coherence elastography (OCE) to monitor the changes in biomechanical properties of ex vivo porcine lenses during formation of cold cataract. Elastic waves were induced in the porcine lenses by a focused micro air-pulse while the lenses were cooled, and the elastic wave velocity was translated to Young's modulus of the lens. The results show an increase in the stiffness of the lens due to formation of the cold cataract (from 11.3 ± 3.4 to 21.8 ± 7.8 kPa). These results show a relation between lens opacity and stiffness and demonstrate that OCE can assess lenticular biomechanical properties and may be useful for detecting and potentially characterizing cataracts.
白内障是全球范围内导致失明的最常见原因之一。了解白内障发生和发展的机制对于临床诊断和治疗非常重要。冷白内障已被证明是一种用于白内障形成的可靠模型,在实验室中可以轻松控制。有证据表明,白内障会显著改变晶状体的生物力学特性。因此,通过对晶状体生物力学特性的特征描述,可以早期检测白内障,评估治疗效果。在这项工作中,我们利用光相干弹性成像(OCE)监测体外猪晶状体在形成冷白内障过程中生物力学特性的变化。通过聚焦微气脉冲在猪晶状体中产生弹性波,同时冷却晶状体,并将弹性波速度转换为晶状体的杨氏模量。结果表明,由于冷白内障的形成,晶状体的硬度增加(从 11.3 ± 3.4 到 21.8 ± 7.8 kPa)。这些结果表明晶状体不透明度与硬度之间存在关系,并证明 OCE 可以评估晶状体的生物力学特性,并且可能有助于检测和潜在地描述白内障。