Zhou H P, Ye X, Huang W, Wu M Q, Mao L N, Yu B, Xu S, Levchenko I, Bazaka K
College of Nanoscale Science and Engineering (CNSE) , State University of New York , Albany , New York 12203 , United States.
Plasma Sources and Application Center/Space Propulsion Centre Singapore, NIE, and Institute of Advanced Studies , Nanyang Technological University , 637616 , Singapore.
ACS Appl Mater Interfaces. 2019 Apr 24;11(16):15122-15132. doi: 10.1021/acsami.8b22673. Epub 2019 Apr 12.
In austere environments, for example, in outer space, on surfaces of extra-terrestrial bodies (Moon, Mars, etc.), or under water, technologies that can enable continuous, reliable, and authentic monitoring of movement of human operators and devices can be critical. We report here the production and human body test of wearable, flexible graphene oxide stress sensors suitable for real-time monitoring of body parameters, state and position of humans, and automatic equipment. These sensors have excellent sensitivity and signal strength across a wide strain range, alleviating the need for additional instrumentation for signal processing and amplification. Their low cost makes them virtually disposable, which may benefit such applications as smart clothing. The sensors were fabricated by a concomitant reduction and N-doping of graphene oxide on polydimethylsiloxane in N-H plasma. The direct bias and other plasma parameters have a significant effect on the reduction and properties of graphene oxide sensors, as shown by optical emission, Raman and X-ray photoelectron spectroscopies, and X-ray diffraction. Optical emission showed different excitation and ionization processes involving atomic and molecular species in the N-H discharge. The photoelectron spectroscopy has confirmed the graphene reduction and introduction of nitrogen doping into the reduced graphene oxide. The bias efficiently controls plasma-induced electric fields, and plasma-related effects determine the N-doping levels. The reduced graphene oxides demonstrate excellent tensile properties, which make them suitable for efficient but cheap stress sensors. This eco-friendly, fast, room-temperature method shows a great potential for fabrication of efficient, flexible sensors.
例如,在严峻环境中,如外层空间、外星体(月球、火星等)表面或水下,能够对人类操作员和设备的运动进行持续、可靠且真实监测的技术至关重要。我们在此报告适用于实时监测人体参数、人体状态和位置以及自动设备的可穿戴柔性氧化石墨烯应力传感器的生产及人体测试情况。这些传感器在很宽的应变范围内具有出色的灵敏度和信号强度,无需额外的信号处理和放大仪器。其低成本使其几乎可一次性使用,这可能有益于智能服装等应用。这些传感器是通过在N - H等离子体中对聚二甲基硅氧烷上的氧化石墨烯进行协同还原和N掺杂来制备的。如光发射、拉曼光谱、X射线光电子能谱以及X射线衍射所示,直接偏压和其他等离子体参数对氧化石墨烯传感器的还原和性能有显著影响。光发射显示了N - H放电中涉及原子和分子物种的不同激发和电离过程。光电子能谱证实了石墨烯的还原以及氮掺杂引入到还原的氧化石墨烯中。偏压有效地控制了等离子体诱导的电场,与等离子体相关的效应决定了N掺杂水平。还原的氧化石墨烯表现出优异的拉伸性能,这使其适用于高效但廉价的应力传感器。这种环保、快速的室温方法在制造高效、柔性传感器方面显示出巨大潜力。