Suppr超能文献

利用光控对注入光载流子进行放大的低暗电流和高响应率石墨烯中红外光电探测器。

Low dark current and high-responsivity graphene mid-infrared photodetectors using amplification of injected photo-carriers by photo-gating.

作者信息

Fukushima Shoichiro, Shimatani Masaaki, Okuda Satoshi, Ogawa Shinpei, Kanai Yasushi, Ono Takao, Inoue Koichi, Matsumoto Kazuhiko

出版信息

Opt Lett. 2019 May 15;44(10):2598-2601. doi: 10.1364/OL.44.002598.

Abstract

Low dark current, high-responsivity middle-wavelength infrared (IR) graphene photodetectors using photo-gating amplification of injected photo-carriers are demonstrated. A graphene/p-indium antimonide (InSb) heterojunction and graphene/insulator region were formed. The injected photo-carriers from InSb to graphene were amplified by photo-gating induced in the graphene/tetraethyl orthosilicate (TEOS) region, resulting in the high responsivity and low dark current performance. A responsivity of 14.9 A/W and an ON/OFF ratio of 2.66×10 were achieved. The photoresponse is shown to be determined by the cross-sectional area between the graphene and the TEOS-SiO, in which the injected photo-carriers into graphene were modulated and amplified by the photo-gating effect. Our results indicate that high-performance IR photodetectors based on the developed graphene photodetectors can be realized.

摘要

展示了利用注入光载流子的光闸放大效应的低暗电流、高响应率的中波长红外(IR)石墨烯光电探测器。形成了石墨烯/p型锑化铟(InSb)异质结和石墨烯/绝缘体区域。从InSb注入到石墨烯的光载流子通过在石墨烯/正硅酸四乙酯(TEOS)区域诱导的光闸效应得到放大,从而实现了高响应率和低暗电流性能。实现了14.9 A/W的响应率和2.66×10的开/关比。结果表明,光响应由石墨烯与TEOS-SiO之间的横截面积决定,其中注入到石墨烯中的光载流子通过光闸效应得到调制和放大。我们的结果表明,基于所开发的石墨烯光电探测器可以实现高性能的红外光电探测器。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验