Suppr超能文献

模拟标准 12 导联心电图中的任意电极反转。

Simulating Arbitrary Electrode Reversals in Standard 12-lead ECG.

机构信息

Institute of Biophysics and Biomedical Engineering, Bulgarian Academy of Sciences, Acad. G. Bonchev Str. Bl 105, 1113 Sofia, Bulgaria.

Signal Processing, Schiller AG, Altgasse 68, CH-6341 Baar, Switzerland.

出版信息

Sensors (Basel). 2019 Jul 1;19(13):2920. doi: 10.3390/s19132920.

Abstract

Electrode reversal errors in standard 12-lead electrocardiograms (ECG) can produce significant ECG changes and, in turn, misleading diagnoses. Their detection is important but mostly limited to the design of criteria using ECG databases with simulated reversals, without Wilson's central terminal (WCT) potential change. This is, to the best of our knowledge, the first study that presents an algebraic transformation for simulation of all possible ECG cable reversals, including those with displaced WCT, where most of the leads appear with distorted morphology. The simulation model of ECG electrode swaps and the resultant WCT potential change is derived in the standard 12-lead ECG setup. The transformation formulas are theoretically compared to known limb lead reversals and experimentally proven for unknown limb-chest electrode swaps using a 12-lead ECG database from 25 healthy volunteers (recordings without electrode swaps and with 5 unicolor pairs swaps, including red (right arm-C1), yellow (left arm-C2), green (left leg (LL) -C3), black (right leg (RL)-C5), all unicolor pairs). Two applications of the transformation are shown to be feasible: 'Forward' (simulation of reordered leads from correct leads) and 'Inverse' (reconstruction of correct leads from an ECG recorded with known electrode reversals). Deficiencies are found only when the ground RL electrode is swapped as this case requires guessing the unknown RL electrode potential. We suggest assuming that potential to be equal to that of the LL electrode. The 'Forward' transformation is important for comprehensive training platforms of humans and machines to reliably recognize simulated electrode swaps using the available resources of correctly recorded ECG databases. The 'Inverse' transformation can save time and costs for repeated ECG recordings by reconstructing the correct lead set if a lead swap is detected after the end of the recording. In cases when the electrode reversal is unknown but a prior correct ECG recording of the same patient is available, the 'Inverse' transformation is tested to detect the exact swapping of the electrodes with an accuracy of (96% to 100%).

摘要

标准 12 导联心电图(ECG)中的电极反转错误会导致显著的心电图变化,并进而产生误导性诊断。检测这些错误很重要,但主要限于使用带模拟反转的 ECG 数据库设计标准来检测电极反转错误,而没有威尔逊中央终端(WCT)电位变化。据我们所知,这是第一项提出用于模拟所有可能的 ECG 导联反转的代数变换的研究,包括那些伴有 WCT 位置改变的导联反转,其中大多数导联的形态都会失真。在标准 12 导联 ECG 配置中推导出 ECG 电极交换和相应的 WCT 电位变化的模拟模型。变换公式从理论上与已知的肢体导联反转进行了比较,并使用来自 25 名健康志愿者的 12 导联 ECG 数据库进行了实验验证,该数据库包含无电极交换和 5 对双色导联交换(包括红色(右臂-C1)、黄色(左臂-C2)、绿色(左腿-C3)、黑色(右腿-C5))的记录)。证明了两种变换应用是可行的:“正向”(从正确导联中模拟导联顺序改变)和“逆向”(从已知电极反转的 ECG 记录中重建正确导联)。只有当 RL 电极接地发生交换时才会发现缺陷,因为这种情况需要猜测未知 RL 电极的电位。我们建议假设该电位与 LL 电极的电位相同。正向变换对于人类和机器的综合训练平台很重要,可以利用可用的正确记录 ECG 数据库资源,可靠地识别模拟的电极交换。如果在记录结束后检测到导联交换,可以使用逆向变换来重建正确的导联集,从而节省重复记录 ECG 的时间和成本。如果电极反转未知,但可以获得同一患者的先前正确 ECG 记录,则可以测试逆向变换以检测电极的精确交换,准确率为(96%至 100%)。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/08b9/6651562/3e0ce7731900/sensors-19-02920-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验