Suppr超能文献

血液及其他生理介质氢离子浓度的测量标准。

A Standard for the Measurement of the H of Blood and Other Physiological Media.

作者信息

Bower Vincent E, Paabo Maya, Bates Roger G

出版信息

J Res Natl Bur Stand A Phys Chem. 1961 May-Jun;65A(3):267-274. doi: 10.6028/jres.065A.031. Epub 1961 Jun 1.

Abstract

A buffer solution containing potassium dihydrogen phosphate (0.008695 molal) and disodium hydrogen phosphate (0.03043 molal) is proposed as a H standard for the physiologically important range, H 7 to 8. The proposed standard solution is prepared by dissolving 1.179 g (air weight) of potassium dihydrogen phosphate and 4.303 g (air weight) of disodium hydrogen phosphate in ammonia-free water and diluting to 1 liter at 25 °C. The ionic strength is 0.1. Standard H values (H) were assigned to this reference solution at temperatures from 0 to 50 °C by means of emf measurements of hydrogen-silver chloride cells without liquid junction. The activity coefficient of chloride ion, upon which the assignment of H depends, was evaluated by means of a recently proposed convention. By this means, standard values precise to ± 0.001 unit could be derived from the emf data. At 25 °C H is 7.414, and at 38 °C it is 7.382. The operational consistency of these standard values with those for the 0.025- equimolal phosphate buffer (one of the NBS primary standards) was demonstrated.

摘要

一种含有磷酸二氢钾(0.008695质量摩尔浓度)和磷酸氢二钠(0.03043质量摩尔浓度)的缓冲溶液被提议作为生理重要范围(pH 7至8)的氢离子标准。该提议的标准溶液通过将1.179克(空气重量)的磷酸二氢钾和4.303克(空气重量)的磷酸氢二钠溶解于无氨水,并在25℃下稀释至1升来制备。离子强度为0.1。通过对无液接界的氢 - 氯化银电池进行电动势测量,在0至50℃的温度范围内为该参考溶液指定标准氢离子值(pH)。pH的指定所依赖的氯离子活度系数通过最近提议的惯例进行评估。通过这种方式,可以从电动势数据得出精确到±0.001单位的标准值。在25℃时pH为7.414,在38℃时为7.382。证明了这些标准值与0.025等摩尔磷酸缓冲液(美国国家标准局主要标准之一)的标准值在操作上的一致性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/adec/5287287/cdc2b5984712/jresv65an3p267_a1bf1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验