Coxa Hospital for Joint Replacement and Faculty of Medicine and Health Technologies, Tampere University, Tampere, Finland.
Acta Orthop. 2020 Aug;91(4):365-371. doi: 10.1080/17453674.2020.1748351. Epub 2020 Apr 14.
Background and purpose - There is limited amount of evidence about optimal revision indications, technique, and implants when performing revision surgery for metal-on-metal (MoM) hip replacements due to adverse reaction to metal debris (ARMD). We assessed which factors are related to re-revisions and complications after a revision of MoM hip arthroplasty because of ARMD. We also aimed to provide information on optimal implants for these revisions.Patients and methods - 420 MoM total hip arthroplasties (THA) and 108 MoM hip resurfacings were implanted and later revised at our institution. We used Cox regression to analyze the factors associated with re-revisions and complications after a revision for ARMD.Results - A re-revision was performed on 27 THAs (6%) and 9 resurfacings (8%). The most common indication for re-revision was recurrent dislocation (20 hips, 4%). Complications not leading to re-revision were seen in 21 THAs (5%) and 6 resurfacings (6%). The most common complication was dislocation treated with closed reduction in 13 hips (2%). Use of revision head size > 36mm was associated with decreased risk for dislocations. Presence of pseudotumor, pseudotumor grade, pseudotumor size, or the choice of bearing couple were not observed to affect the risk for re-revision. Non-linear association was observed between preoperative cobalt and risk for re-revision.Interpretation - As dislocation was the most frequent post-revision complication, large head sizes should be used in revisions. Because size or type of pseudotumor were not associated with risk of re-revision, clinicians may have to reconsider, how much weight is put on the imaging findings when deciding whether or not to revise. In our data blood cobalt was associated with risk for re-revision, but this finding needs further assessment.
背景与目的-由于金属颗粒导致的不良反应(ARMD),对于金属对金属(MoM)髋关节置换术后进行翻修手术的最佳翻修指征、技术和植入物,目前仅有有限的证据。我们评估了哪些因素与 MoM 髋关节置换术后因 ARMD 而进行的再次翻修和并发症有关。我们还旨在为这些翻修提供最佳植入物的信息。
患者和方法-在我们的机构中,共植入了 420 例 MoM 全髋关节置换术(THA)和 108 例 MoM 髋关节表面置换术,并对其进行了翻修。我们使用 Cox 回归分析了与 ARMD 翻修后再次翻修和并发症相关的因素。
结果-27 例 THA(6%)和 9 例髋关节表面置换术(8%)进行了再次翻修。再次翻修的最常见指征是复发性脱位(20 髋,4%)。21 例 THA(5%)和 6 例髋关节表面置换术(6%)出现了未导致再次翻修的并发症。最常见的并发症是 13 髋(2%)经闭合复位治疗的脱位。使用大于 36mm 的翻修头大小与降低脱位风险相关。存在假瘤、假瘤分级、假瘤大小或轴承对的选择与再次翻修的风险无关。术前钴的存在与再次翻修的风险之间存在非线性关联。
结论-由于脱位是最常见的翻修后并发症,因此应在翻修中使用大头尺寸。由于假瘤的大小或类型与再次翻修的风险无关,因此临床医生在决定是否翻修时,可能需要重新考虑在多大程度上重视影像学发现。在我们的数据中,血钴与再次翻修的风险相关,但这一发现需要进一步评估。