School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology (UNIST), 50 UNIST-gil, Eonyang-eup, Ulju-gun, Ulsan 44919, Korea.
Int J Environ Res Public Health. 2020 Jul 1;17(13):4737. doi: 10.3390/ijerph17134737.
The management of cattle manure (CM) has become increasingly challenging because its production continues to rise, while the regulations on manure management have become increasingly stringent. In Korea, most farms produce CM as a dry mixture with lignocellulosic bedding materials (mainly sawdust), making it impractical to treat CM by anaerobic digestion. To address this problem, this study examined whether anaerobic co-digestion with food waste (FW) and pig manure (PM) could be an effective approach for the treatment of CM. The batch anaerobic digestion tests at different CM: FW: PM mixing ratios showed that more methane was produced as the FW fraction increased, and as the CM fraction decreased. The response surface models describing how the substrate mixing ratio affects the methane yield and synergistic effect (methane yield basis) were successfully generated. The models proved that the methane yield and synergistic effect respond differently to changes in the substrate mixing ratio. The maximum 30-day methane yield was predicted at 100% FW, whereas the maximum 30-day synergy index was estimated for the mixture of 47% CM, 6% FW, and 47% PM (total solids basis). The synergy index model showed that CM, FW, and PM could be co-digested without a substantial loss of their methane potential at any mixing ratio (30-day synergy index, 0.89-1.22), and that a possible antagonistic effect could be avoided by keeping the FW proportion less than 50%. The results suggest that co-digestion with PM and FW could be flexibly applied for the treatment and valorization of CM in existing anaerobic digestion plants treating FW and PM.
牛粪(CM)的管理变得越来越具有挑战性,因为其产量持续增加,而对粪便管理的规定却越来越严格。在韩国,大多数农场都以干混合物的形式生产 CM,其中含有木质纤维素垫料(主要是木屑),因此通过厌氧消化处理 CM 是不切实际的。为了解决这个问题,本研究探讨了与食物垃圾(FW)和猪粪(PM)进行厌氧共消化是否可以成为处理 CM 的有效方法。不同 CM:FW:PM 混合比例的分批厌氧消化测试表明,随着 FW 部分的增加和 CM 部分的减少,产生了更多的甲烷。成功生成了描述底物混合比例如何影响甲烷产量和协同效应(基于甲烷产量)的响应面模型。这些模型证明,甲烷产量和协同效应对底物混合比例的变化有不同的响应。在 100%FW 的情况下预测了 30 天最大甲烷产量,而在 47%CM、6%FW 和 47%PM(总固体基础)混合物下估计了 30 天最大协同指数。协同指数模型表明,在任何混合比例下(30 天协同指数为 0.89-1.22),CM、FW 和 PM 都可以进行共消化,而不会大量损失其甲烷潜力,并且通过保持 FW 比例小于 50%可以避免可能的拮抗作用。结果表明,与 PM 和 FW 共消化可以灵活应用于处理和利用现有的处理 FW 和 PM 的厌氧消化厂中的 CM。