Department of Process Engineering, Stellenbosch University, Private Bag X1, Matieland 7602, South Africa.
Department of Process Engineering, Stellenbosch University, Private Bag X1, Matieland 7602, South Africa; Department of Microbiology, Stellenbosch University, Private Bag X1, Matieland 7602, South Africa.
Enzyme Microb Technol. 2020 Sep;139:109593. doi: 10.1016/j.enzmictec.2020.109593. Epub 2020 May 12.
Lignin peroxidase (LiP) is a well-recognized enzyme for its ability to oxidize lignins, but its commercial availability is limited, which hinders the biotechnological application of LiP-based bioprocesses in lignocellulose biorefineries. This study evaluated a combination strategy to improve the expression of LiP to promote its practical use. The strategy included optimization of the lipH8 gene of Phanerochaete chrysosporium according to the codon usage of Pichia pastoris, followed by fed-batch fermentation using a 14 L bioreactor (10 L working volume). The combination strategy achieved a maximum volumetric LiPH8 activity of 4480 U L, protein concentration of 417 mg L and a specific activity of 10.7 U mg, which was higher than previous reports. Biochemical characterization showed that the recombinant LiPH8 (rLiPH8) was optimum at pH 3.0, 25 ℃ and 0.4 mM HO. Using the optimized conditions, rLiPH8 was used to treat isolated technical lignins namely soda-anthraquinone (SAQ) lignin and steam explosion (S-E) lignin. High-performance gel permeation chromatography (HP-GPC) analysis showed that the molecular weight (Mw) of SAQ and S-E lignins were increased by 1.43-and 1.14-fold, respectively, after the enzymatic treatment. Thermogravimetric analysis (TGA) also showed that the thermal stability of the lignins was improved, indicating that the enzyme treatment of lignins with rLiPH8 resulted in lignin re-polymerization. As the first report on rLiPH8 production using P. pastoris, this study has shed light on the possible route for the enhancement of rLiPH8 production and its potential application for upgrading technical lignins.
木质素过氧化物酶(LiP)因其氧化木质素的能力而被广泛认可,但由于其商业可用性有限,限制了基于 LiP 的生物工艺在木质纤维素生物精炼厂中的生物技术应用。本研究评估了一种组合策略,以提高 LiP 的表达水平,从而促进其实际应用。该策略包括根据巴斯德毕赤酵母的密码子使用优化 Phanerochaete chrysosporium 的 lipH8 基因,然后使用 14 L 生物反应器(10 L 工作体积)进行分批补料发酵。该组合策略实现了最大体积 LiPH8 活性 4480 U L、蛋白浓度 417 mg L 和比活 10.7 U mg,高于以往报道。生化特性表明,重组 LiPH8(rLiPH8)在 pH 3.0、25℃和 0.4 mM HO 下最佳。使用优化条件,rLiPH8 用于处理分离的技术木质素,即苏打蒽醌(SAQ)木质素和蒸汽爆破(S-E)木质素。高效凝胶渗透色谱(HP-GPC)分析表明,酶处理后,SAQ 和 S-E 木质素的分子量(Mw)分别增加了 1.43 倍和 1.14 倍。热重分析(TGA)也表明木质素的热稳定性得到了提高,表明 rLiPH8 酶处理木质素导致木质素的重新聚合。作为使用巴斯德毕赤酵母生产 rLiPH8 的第一份报告,本研究为提高 rLiPH8 产量及其在技术木质素升级方面的潜在应用提供了可能途径。