Sharma Indu, Papanai Girija Shankar, Paul Sharon Jyotika, Gupta Bipin Kumar
Photonic Materials Metrology Sub Division, Advanced Materials and Device Metrology Division, CSIR-National Physical Laboratory, New Delhi 110012, India.
Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India.
ACS Omega. 2020 Aug 26;5(35):22109-22118. doi: 10.1021/acsomega.0c02132. eCollection 2020 Sep 8.
An attempt has been made to understand the thermodynamic mechanism study of the low-pressure chemical vapor deposition (LPCVD) process during single-layer graphene (SLG) growth as it is the most debatable part of the CVD process. The intensive studies are being carried out worldwide to enhance the quality of LPCVD-grown graphene up to the level of mechanically exfoliated SLG. The mechanism and processes have been discussed earlier by several research groups during the variation in different parameters. However, the optimization and mechanism involvement due to individual partial pressure-based effects has not been elaborately discussed so far. Hence, we have addressed this issue in detail including thermodynamics of the growth process and tried to establish the effect of the partial pressures of individual gases during the growth of SLG. Also, optical microscopy, Raman spectroscopy, and atomic force microscopy (AFM) have been performed to determine the quality of SLG. Furthermore, nucleation density has also been estimated to understand a plausible mechanism of graphene growth based on partial pressure. Moreover, the field-effect transistor (FET) device has been fabricated to determine the electrical properties of SLG, and the estimated mobility has been found as ∼2595 cm V s at = -2 × 10 cm. Hence, the obtained results trigger that the partial pressure is an important parameter for the growth of SLG and having various potential applications in high-performance graphene FET (GFET) devices.
人们试图了解单层石墨烯(SLG)生长过程中低压化学气相沉积(LPCVD)工艺的热力学机制研究,因为这是CVD工艺中最具争议的部分。全球范围内正在进行深入研究,以将LPCVD生长的石墨烯质量提高到机械剥离的SLG的水平。几个研究小组此前在不同参数变化期间讨论过该机制和过程。然而,到目前为止,尚未详细讨论基于单个分压效应的优化和机制参与情况。因此,我们详细阐述了这个问题,包括生长过程的热力学,并试图确定SLG生长过程中各个气体分压的影响。此外,还进行了光学显微镜、拉曼光谱和原子力显微镜(AFM)检测,以确定SLG的质量。此外,还估计了成核密度,以了解基于分压的石墨烯生长的合理机制。此外,还制造了场效应晶体管(FET)器件来确定SLG的电学性质,在 = -2 × 10 cm时,估计迁移率约为2595 cm V s。因此,所得结果表明,分压是SLG生长的一个重要参数,在高性能石墨烯场效应晶体管(GFET)器件中具有各种潜在应用。