Departament of Chemical Engineering, Federal University of Ceara, Campus do Pici, Bloco 709, Fortaleza, CE, 60455-760, Brazil.
Bioprocess Biosyst Eng. 2021 Apr;44(4):713-725. doi: 10.1007/s00449-020-02480-9. Epub 2021 Jan 2.
Xylitol was biotechnologically produced by Kluyveromyces marxianus ATCC36907 using the hemicellulosic hydrolysate of the cashew apple bagasse (CABHH). Sequentially, the present study investigated the recovery and purification of xylitol evaluating different antisolvents [ethanol, isopropanol and the ionic liquid 2-hydroxyl-ethylammonium acetate (2-HEAA)], their proportion in the medium (10-90% v/v), and their cooling rate (V 0.25-0.50 °C/min). These processes were contrasted with the crystallization process of commercial xylitol. This study is the first to assess xylitol crystallization using a protic ionic liquid. The hydrolysate obtained from a mild treatment with sulfuric acid contained mainly glucose and xylose at concentrations of 15.7 g/L and 11.9 g/L, respectively. With this bioprocess, a maximum xylitol production of 4.5 g/L was achieved. The performance of the investigated antisolvents was similar in all conditions evaluated in the crystallization process of the commercial xylitol, with no significant difference in yields. For the crystallization processes of the produced xylitol, the best conditions were: 50% (v/v) isopropanol as antisolvent, cooling rate of 0.5 °C/min, with a secondary nucleation of yield and purity of 69.7% and 84.8%, respectively. Under the same linear cooling rate, using ethanol, isopropanol or the protic ionic liquid 2-hydroxyl-ethylammonium acetate (2-HEAA), crystallization did not occur, probably due to the presence of carbohydrates not metabolized by the yeast in the broth, which influences the solubility curve of xylitol. With the results of this work, a possible economical and environmentally friendly process of recovery and purification of xylitol from CABHH could be proposed.
木糖醇通过 Kluyveromyces marxianus ATCC36907 利用腰果苹果渣的半纤维素水解产物(CABHH)进行生物技术生产。随后,本研究评估了不同抗溶剂[乙醇、异丙醇和离子液体 2-羟乙基氯化铵(2-HEAA)]的回收和纯化木糖醇的效果,考察了它们在介质中的比例(10-90% v/v)以及冷却速率(V 0.25-0.50°C/min)。这些过程与商业木糖醇的结晶过程进行了对比。本研究首次评估了质子离子液体用于木糖醇结晶。通过硫酸温和处理获得的水解产物主要含有葡萄糖和木糖,浓度分别为 15.7 g/L 和 11.9 g/L。采用该生物过程,实现了 4.5 g/L 的最大木糖醇产量。在所评估的商业木糖醇结晶过程的所有条件下,所研究的抗溶剂的性能相似,产率没有显著差异。对于生产的木糖醇的结晶过程,最佳条件为:50%(v/v)异丙醇作为抗溶剂,冷却速率为 0.5°C/min,二次成核产率和纯度分别为 69.7%和 84.8%。在相同的线性冷却速率下,使用乙醇、异丙醇或质子离子液体 2-羟乙基氯化铵(2-HEAA),结晶不会发生,可能是由于发酵液中存在酵母未代谢的碳水化合物,这会影响木糖醇的溶解度曲线。根据这项工作的结果,可以提出一种从 CABHH 中回收和纯化木糖醇的经济环保的工艺。